English
Language : 

TLE42994V33_14 Datasheet, PDF (22/33 Pages) Infineon Technologies AG – Extreme Low Current Consumption In ON State
TLE42994V33
Block Description and Electrical Characteristics
Table 7 Electrical Characteristics Reset Function
VI = 13.5 V, -40 °C ≤ Tj ≤ 150 °C, all voltages with respect to ground, positive current flowing into pin (unless
otherwise specified)
Parameter
Symbol
Values
Unit Note / Test Condition Number
Min. Typ. Max.
Output Undervoltage Reset
Default Output Undervoltage Reset VRT
Switching Thresholds
3.00 3.10 3.20 V
VQ decreasing
P_5.6.1
Output Undervoltage Reset
Headroom
VRH
50 200 300 mV –
P_5.6.2
Output Undervoltage Reset Threshold Adjustment
Reset Adjust
Switching Threshold
VRADJ,th 1.26 1.36 1.44 V
VQ > 2.5 V
P_5.6.3
Reset Adjustment Range1)
Reset Output RO
VRT,range 2.50 –
3.10 V
–
P_5.6.4
Reset Output Low Voltage
Reset Output Internal
Pull-up Resistor to VQ
Optional Reset Output External
Pull-up Resistor to VQ
Reset Delay Timing
VRO,low –
0.1 0.4 V
RRO
10 20 40 kΩ
RRO,ext 5.6 –
–
kΩ
1 V ≤ VQ ≤ VRT
no external RRO,ext
–
1 V ≤ VQ ≤ VQ ;
VRT ≤ 0.4 V
P_5.6.5
P_5.6.6
P_5.6.7
Delay Pin Output Voltage
Power On Reset Delay Time
Upper Delay
Switching Threshold
VD
–
–
5
V
–
P_5.6.8
trd
36 51 60 ms CD = 100 nF
P_5.6.9
Calculated Value:
trd = CD * VDU / ID,ch
VDU
–
1.85 –
V
–
P_5.6.10
Lower Delay
Switching Threshold
VDL
–
0.50 –
V
–
P_5.6.11
Delay Capacitor
Charge Current
ID,ch
–
3.5 –
µA
VD = 1 V
P_5.6.12
Delay Capacitor
Reset Discharge Current
ID,dch
–
70 –
mA VD = 1 V
P_5.6.13
Delay Capacitor
Discharge Time
trr, d
–
1.7 3.0 µs
Internal Reset Reaction Time
Reset Reaction Time
trr, int
–
trr, total
–
20 25 µs
21.7 28 µs
1) VRT is scaled linearly, in case the Reset Switching Threshold is modified
2) parameter not subject to production test; specified by design
Calculated Value:
trr, d = CD*(VDU - VDL)/
ID,dch
CD = 100 nF
CD = 0 nF 2)
Calculated Value:
trr, total = trr, int + trr,d
CD = 100 nF
P_5.6.14
P_5.6.15
P_5.6.16
Data Sheet
22
Rev. 1.1, 2014-07-03