ICE3RBR0665JG Datasheet, PDF (20/32 Pages) Infineon Technologies AG – Fixed-Frequency, 650V CoolSET™ in DS0-12 Package

Fixed-Frequency, 650V CoolSET™ in DS0-12 Package
Electrical Characteristics
4
Note:
Electrical Characteristics
All voltages are measured with respect to ground (Pin 12). The voltage levels are valid if other ratings
are not violated.
4.1
Absolute Maximum Ratings
Note:
Absolute maximum ratings are defined as ratings, which when being exceeded may lead to
destruction of the integrated circuit. For the same reason make sure, that any capacitor that will be
connected to pin 11 (VCC) is discharged before assembling the application circuit. Ta=25^°C unless
otherwise specified.
Table 3
Absolute Maximum Ratings
Parameter
Symbol
Switching drain current, pulse width tp
limited by Tj=150 °C
Pulse drain current, pulse width tp
lAimvailtaendcbhyeT_{ejn=e1r5g0y°,Crepetitive tAR}
lAimvailtaendcbhyemcuarxr.eT_{njt=,1r5e0pe°Cti}¹_{tive tAR}
lVimCCitSeudpbpylymVaoxl.taT_gj=e150 °C¹
IS
ID_Plus
EAR
IAR
VVCC
FB Voltage
VFB
BA Voltage
VBA
CS Voltage
VCS
Junction Temperature
Tj
Storage Temperature
TS
Thermal Resistance
RthJA
(Junction–Ambient)
Soldering temperature, wavesoldering T_sold
oESnDlyCaallpoawbeidlitayt(lienacdl.sDrain _Pin)
VESD
Limit Values
Unit
min. max.
-
9.95 A
-
15.75 A
-
0.47 mJ
-
2.5
A
-0.3 27
V
-0.3 5.5
V
-0.3 5.5
V
-0.3 5.5
V
-40
150
°C
-55
150
°C
-
110 K/W
-
260 ° C
-
2
kV
Remarks
Controller & CoolMOS™
1.6 mm (0.063 in.) from case
fHourm10ans _{body model}2
1 _{Repetitive avalanche causes additional power losses that can be calculated as PAV=EAR*f}
2 _{According to EIA/JESD22-A114-B (discharging a 100 pF capacitor through a 1.5 kW series resistor)}
Data Sheet
20
Revision 1.0
2016-05-12