ICE3RBR0665JZ Datasheet, PDF (19/31 Pages) Infineon Technologies AG – Off-Line SMPS Current Mode Controller with integrated 650V

ICE3RBR0665JZ
Electrical Characteristics
4 Electrical Characteristics
Note: All voltages are measured with respect to ground (Pin 8). The voltage levels are valid if other ratings are
not violated.
4.1
Absolute Maximum Ratings
Note: Absolute maximum ratings are defined as ratings, which when being exceeded may lead to destruction
of the integrated circuit. For the same reason make sure, that any capacitor that will be connected to pin 7
(VCC) is discharged before assembling the application circuit.T_a=25°C unless otherwise specified.
Parameter
Symbol
Limit Values Unit Remarks
min. max.
Switching drain current, pulse width t_p I_s
limited by T_j=150°C
Pulse drain current, pulse width t_p limited I_{D_Puls}
by T_j=150°C
Avalanche energy, repetitive t_AR limited by E_AR
max. T_j=150°C¹⁾
Avalanche current, repetitive t_AR limited by I_AR
max. T_j=150°C¹⁾
VCC Supply Voltage
V_VCC
FB Voltage
V_FB
BA Voltage
V_BA
CS Voltage
V_CS
Junction Temperature
T_j
Storage Temperature
T_S
Thermal Resistance
Junction -Ambient
R_thJA
-
9.95 A
-
15.75 A
-
0.47 mJ
-
2.5
A
-0.3
27
V
-0.3
5.5
V
-0.3
5.5
V
-0.3
5.5
V
-40
150
°C
Controller & CoolMOS^®
-55
150
°C
-
96
K/W
Soldering temperature, wavesoldering T_sold
only allowed at leads
-
260
°C
1.6mm (0.063in.) from
case for 10s
ESD Capability (incl. Drain Pin)
V_ESD
-
2
kV
Human body model²⁾
1) _{Repetitive avalanche causes additional power losses that can be calculated as PAV=EAR*f}
2) _{According to EIA/JESD22-A114-B (discharging a 100pF capacitor through a 1.5kΩ series resistor)}
Version 2.0
19
7 Jun 2013