1EDI10I12MF Datasheet, PDF (18/22 Pages) Infineon Technologies AG – Output with Clamp variant for IGBT

1EDI EiceDRIVER™ Compact
1EDIxxI12MF
Electrical Parameters
5.3.6 Dynamic Characteristics
Dynamic characteristics are measured with V_VCC1 = 5 V and V_VCC2 = 15 V.
Table 9 Dynamic Characteristics
Parameter
Symbol
Min.
Input IN to output propa- T_PDON
270
gation delay ON
Input IN to output propa- T_PDOFF
270
gation delay OFF
Input IN to output propa- T_PDISTO -30
gation delay distortion
(T_PDOFF - T_PDON)
Input pulse suppression T_MININ+, 230
IN+, IN-
T_MININ-
IN input to output
T_PDONt
–
propagation delay ON
variation due to temp
IN input to output
T_PDOFFt
–
propagation delay OFF
variation due to temp
IN input to output
propagation delay
T_PDISTOt
–
distortion variation due to
temp (T_PDOFF-T_PDON)
Rise time
T_RISE
5
Values
Unit
Typ.
Max.
300
330
ns
300
330
ns
5
40
ns
240
–
ns
–
14
ns
–
14
ns
–
8
ns
9
19
ns
Fall time
T_FALL
3
6
15
ns
1) The parameter is not subject to production test - verified by design/characterization
Note /
Test Condition
C_LOAD = 100 pF
V_IN+ = 50%,
V_OUT=50% @ 25°C
–
1)_{CLOAD = 100 pF}
V_IN+ = 50%,
V_OUT=50%
1)_{CLOAD = 100 pF}
V_IN+ = 50%,
V_OUT=50%
1)_{CLOAD = 100 pF}
V_IN+ = 50%,
V_OUT=50%
C_LOAD = 1 nF
V_L 20%, V_H 80%
C_LOAD = 1 nF
V_L 20%, V_H 80%
5.3.7 Active Shut Down
Table 10 Active Shut Down
Parameter
Symbol
Active shut down voltage
V 1)
ACTSD
Min.
–
1) With reference to GND2
Values
Typ.
1.8
Max.
2.0
Unit
V
Note /
Test Condition
I_OUT-/I_OUT-,PEAK=0.1,
V_CC2 open
Data Sheet
18
Rev. 2.0, 2014-11-10