1EDI10I12MF Datasheet, PDF (14/22 Pages) Infineon Technologies AG – Output with Clamp variant for IGBT

5
Electrical Parameters
1EDI EiceDRIVER™ Compact
1EDIxxI12MF
Electrical Parameters
5.1
Absolute Maximum Ratings
Note: Absolute maximum ratings are defined as ratings, which when being exceeded may lead to destruction of
the integrated circuit. Unless otherwise noted all parameters refer to GND1.
Table 2 Absolute Maximum Ratings
Parameter
Power supply output side
Gate driver output
Pin CLAMP voltage
Symbol
V_VCC2
V_OUT
V_CLAMP
Values
Unit
Min.
Max.
-0.3
20
V
V_GND2-0.3
-0.3
V_VCC2+0.3 V
V_VCC2
V
+0.3¹⁾
Note /
Test Condition
1)
–
1)
Maximum short circuit clamping time
t_CLP
–
10
μs
I_CLAMP/OUT =
500 mA
Positive power supply input side
V_VCC1
-0.3
18.0
V
–
Logic input voltages (IN+,IN-)
V_LogicIN
-0.3
18.0
V
–
Input to output isolation voltage (GND2)
V_ISO
-1200
1200
V
Junction temperature
T_J
-40
150
°C
–
Storage temperature
Power dissipation (Input side)
Power dissipation (Output side)
Thermal resistance (Input side)
Thermal resistance (Output side)
T_S
-55
P_{D, IN}
–
P_{D, OUT}
–
R_THJA,IN
–
R_THJA,OUT –
150
°C
–
25
mW
2) _{@TA = 25°C}
400
mW
2) _{@TA = 25°C}
145
K/W
2) _{@TA = 85°C}
165
K/W
2) _{@TA = 85°C}
ESD capability
V_ESD,HBM –
2
kV
Human Body
Model³⁾
1) May be exceeded during short circuit clamping.
2) See Figure 9 for reference layouts for these thermal data. Thermal performance may change significantly with layout and
heat dissipation of components in close proximity.
3) According to EIA/JESD22-A114-C (discharging a 100 pF capacitor through a 1.5 kΩ series resistor).
Data Sheet
14
Rev. 2.0, 2014-11-10