V23818-N15-L17 Datasheet, PDF (17/27 Pages) Infineon Technologies AG – Small Form Factor Single Mode 1300 nm Multirate up to 2.5 Gbit/s Transceiver 2x5/2x10 Pinning with LC™ Connector

V23818-N15-Lxx/Lxxx
Technical Data
Jitter
The transceiver is specified to meet the SONET Jitter performance as outlined in ITU-T
G.958 and Telcordia GR-253.
Jitter Generation is defined as the amount of jitter that is generated by the transceiver.
The Jitter Generation specifications are referenced to the optical OC-48 signals. If no or
minimum jitter is applied to the electrical inputs of the transmitter, then Jitter Generation
can simply be defined as the amount of jitter on the Tx optical output. The SONET
specifications for Jitter Generation are 0.01 UI RMS, maximum and 0.1 UI pk-pk,
maximum. Both are measured with a 12 kHz - 20 MHz filter in line. A UI is a Unit Interval,
which is equivalent to one bit slot. At OC-48, the bit slot is 400 ps, so the Jitter Generation
specification translates to 4 ps RMS, max. and 40 ps pk-pk, max.
Data Sheet
17
2003-08-18