V23818-N15-L17 Datasheet, PDF (10/27 Pages) Infineon Technologies AG – Small Form Factor Single Mode 1300 nm Multirate up to 2.5 Gbit/s Transceiver 2x5/2x10 Pinning with LC™ Connector

V23818-N15-Lxx/Lxxx
Description
Description
The Infineon 2.5 Gigabit single mode transceiver – part of the Infineon Small Form Factor
transceiver family – is based on the Physical Medium Depend (PMD) sublayer and
baseband medium, type 2000 Base-LX, compliant with ITU-T G.957 STM-16, S-16.1 and
SONET OC-48 SR-1.
This transceiver is also suitable for multirate applications. The performance at lower
datarates may vary from application to application and is link dependent. Refer to
Infineon Application Note 97 for more information.
The appropriate fiber optic cable is 9 µm single mode fiber with LC connector.
The Infineon OC-48 single mode transceiver is a single unit comprised of a transmitter,
a receiver, and an LC receptacle. This design frees the customer from many alignment
and PC board layout concerns.
This transceiver supports the LC connectorization concept, which competes with UTP/
CAT 5 solutions. It is compatible with RJ-45 style backpanels for fiber-to-the-desktop
applications while providing the advantages of fiber optic technology. The transmission
distance is up to 2 km.
The module is designed for low cost LAN, WAN, and up to 2.5 Gbit/s applications. It can
be used as the network end device interface in mainframes, workstations, servers, and
storage devices, and in a broad range of network devices such as bridges, routers, hubs,
and local and wide area switches.
This transceiver operates at up to 2.5 Gbit/s from a single power supply (+3.3 V). The
full differential data inputs and outputs are LVPECL compatible.
Data Sheet
10
2003-08-18