V23814-K1306-M136 Datasheet, PDF (17/27 Pages) Infineon Technologies AG – PAROLI Tx AC, 1.25 Gbit/s

V23814-K1306-M136
V23815-K1306-M136
Technical Data
Parameter
Symbol
Limit Values Unit
min.
max.
–RESET on Delay Time
–RESET off Delay Time
–RESET Low Duration¹⁾
t₁
100
ms
t₂
50
µs
t₃
10
1) _{Only when not used as power on reset. At any failure recovery, –RESET must be brought to low level for at least t3.}
Receiver Electrical Characteristics
Parameter
Symbol
Limit Values
min.
typ.
max.
Supply Current
I_CC
Power Consumption
P
250
350
0.8
1.3
LVDS Output Low Voltage^{1), 2)} V_LVDSOL 925
LVDS Output High Voltage^{1), 2)} V_LVDSOH
LVDS Output Differential
Voltage^{1), 2), 3)}
|V_OD|
250
1475
400
LVDS Output Offset Voltage^{1), 2), 4)} V_OS
1125
LVDS Rise/Fall Time⁵⁾
t_R, t_F
LVCMOS Output Voltage Low V_LVCMOSOL
LVCMOS Output Voltage High V_LVCMOSOH 2500
LVCMOS Input Current High/Low I_LVCMOSI –500
LVCMOS Output Current High⁶⁾ I_LVCMOSOH
LVCMOS Output Current Low⁷⁾ I_LVCMOSOL
Total Jitter^{8), 9)}
J_T
Deterministic Jitter⁸⁾
J_D
Channel-to-channel skew¹⁰⁾
t_CSK
1275
400
400
500
0.5
4.0
0.332
0.08
100
1) _{Level Diagram: see Figure 8}
2) _{LVDS output must be terminated differentially with Rt.}
3) _{|VOD| = |(output voltage of non-inverted output minus output voltage of inverted output)|.}
4) _{VOS = 1/2 (output voltage of inverted output + output voltage of non-inverted output).}
5) _{Measured between 20% and 80% level with a maximum capacitive load of 5 pF.}
6) _{Source current.}
7) _{Sink current.}
8) _{With no optical input jitter.}
9) _{At sensitivity limit of 0.028 mW OMA.}
10) _{With input channel-to-channel skew 0 ps.}
Unit
mA
W
mV
ps
mV
µA
mA
UI
ps
Data Sheet
17
2001-12-01