TLE7259-2GE Datasheet, PDF (17/31 Pages) Infineon Technologies AG – LIN Transceiver

TLE7259-2GE
General Product Characteristics
5
General Product Characteristics
5.1
Absolute Maximum Ratings
Table 3 Absolute Maximum Ratings Voltages, Currents and Temperatures¹⁾
All voltages with respect to ground; positive current flowing into pin;
(unless otherwise specified)
Pos. Parameter
Symbol Limit Values
Unit Remarks
Min.
Max.
Voltages
5.1.1 Battery supply voltage
V_S
-0.3
40
5.1.2 Bus and WK input voltage
versus GND
versus V_S
V_BUS,G
-40
40
V_BUS,Vs
-40
40
5.1.3 Logic voltages at EN, TxD, V_logic
-0.3
5.5
RxD
V
LIN Spec 2.1 Param. 10
–
V
V
V
–
5.1.4 INH Voltage
versus GND
versus V_S
Currents
V_INH,G
-0.3
40
V_{INH, Vs}
-40
0.3
5.1.5 Output current at INH
I_INH
Temperatures
-150
80
–
V
V
mA
2)
5.1.6 Junction temperature
T_j
5.1.7 Storage temperature
T_s
ESD Resistivity
-40
150
°C
–
-55
150
°C
–
5.1.8 Electrostatic discharge
V_ESD
-6
6
voltage at V_S, Bus, WK
versus GND
kV
Human Body Model
(100pF via 1.5 kΩ)³⁾
5.1.9 Electrostatic discharge
V_ESD
-2
2
voltage all pins
kV
Human Body Model
(100pF via 1.5 kΩ)³⁾
1) Not subject to production test, specified by design
2) Output current is internally limited to -150 mA
3) ESD susceptibility HBM according to EIA / JESD 22-A 114
Note: Stresses above the ones listed here may cause permanent damage to the device. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
Note: Integrated protection functions are designed to prevent IC destruction under fault conditions described in the
data sheet. Fault conditions are considered as “outside” normal operating range. Protection functions are
not designed for continuous repetitive operation.
Data Sheet
17
Rev. 1.1, 2008-09-05