ICE3PCS02G Datasheet, PDF (14/20 Pages) Infineon Technologies AG – Standalone Power Factor Correction (PFC) Controller in Continuous Conduction Mode (CCM)

CCM-PFC
ICE3PCS02G
Electrical Characteristics
4 Electrical Characteristics
All voltages are measured with respect to ground (pin 2). The voltage levels are valid if other ratings are not
violated.
4.1 Absolute Maximum Ratings
Absolute maximum ratings are defined as ratings, which when being exceeded may lead to destruction of the
integrated circuit. For the same reason make sure, that any capacitor that will be connected to pin 7 (VCC) is
discharged before assembling the application circuit.
Parameter
Symbol
Values
Unit Note / Test Condition
Min. Typ. Max.
VCC Supply Voltage
GATE Voltage
V_VCC
V_GATE
-0.3
-0.3
26
V
17
V Clamped at 15V if
driven internally.
ISENSE Voltage
V_ISENSE
-20
5.3
V ¹⁾
ISENSE Current
I_ISENSE
-1
1
mA
VSENSE Voltage
V_VSENSE
-0.3
5.3
V
VSENSE Current
I_VSENSE
-1
1
mA
ICOMP Voltage
V_ICOMP
-0.3
5.3
V
FREQ Voltage
V_FREQ
-0.3
5.3
V
OVP Voltage
V_OVP
-0.3
5.3
V
Junction Temperature
T_J
-40
150 °C
Storage Temperature
T_A,STO
-55
150 °C
Thermal Resistance
R_THJA
185 K/W Junction to Air
Soldering Temperature
T_SLD
260
°C Wave Soldering²⁾
ESD Capability
V_ESD
2
kV Human Body Model³⁾
1) _{Absolute ISENSE current should not be exceeded}
2) _{According to JESD22A111}
3) _{According to EIA/JESD22-A114-B (discharging an 100 pF capacitor through an 1.5kΩ series resistor)}
Version 2.0
14
5 May 2010