1ED020I12FA Datasheet, PDF (14/22 Pages) Infineon Technologies AG – Single IGBT Driver IC

EICEDRIVER®
1ED020I12FA
Electrical Parameters
4.4.6
Dynamic Characteristics
Parameter
Symbol
Input to output propagation delay ON
Input to output propagation delay OFF
Input to output propagation delay
distortion
Input to output propagation delay ON
variation due to temp
Input to output propagation delay OFF
variation due to temp
Input to output propagation delay
distortion variation due to temp
Input to output propagation delay ON
variation due to temp
Input to output propagation delay OFF
variation due to temp
Input to output propagation delay
distortion variation due to temp
Rise Time
T_PDON
T_PDOFF
T_PDISTO
T_PDONt
T_PDOFFt
T_PDISTOt
T_PDONt
T_PDOFFt
T_PDISTOt
T_RISE
Fall Time
T_FALL
Limit Values
min.
typ.
160
185
145
165
-50
-20
160
190
160
190
-30
0
160
190
130
160
-60
-30
10
30
200
400
10
50
200
450
max.
750¹⁾
185
555 ¹⁾
990 ¹⁾
220
800 ¹⁾
990 ¹⁾
190
770 ¹⁾
Unit Test Conditions
ns V_VCC1 =5V
ns ^VVCC2 ^=15V,VVEE2 ^=-8V
ns
C_LOAD= 100pF
V_IN+=50%, V_OUT=50%
@ T_A =25°C
ns
V_VCC1 =5V
ns
V_VCC2 =15V,V_VEE2 =-8V
C_LOAD= 100pF
V_IN+=50%, V_OUT=50%
ns _{@ TA =125°C}
ns
V_VCC1 =5V
ns
V_VCC2 =15V,V_VEE2 =-8V
C_LOAD= 100pF
V_IN+=50%, V_OUT=50%
ns _{@ TA =-40°C}
60
ns V_VCC2 =15V,V_VEE2 =-8V
C_LOAD= 1nF
VL 10% ,VH 90%
800 ns V_VCC2 =15V,V_VEE2 =-8V
C_LOAD= 34nF
VL 10% ,VH 90%
90
ns V_VCC2 =15V,V_VEE2 =-8V
C_LOAD= 1nF
VL 10% ,VH 90%
600 ns V_VCC2 =15V,V_VEE2 =-8V
C_LOAD= 34nF
VL 10% ,VH 90%
1) The maximum value of input to output propagation delay ON occures only in case of electromagnetic interferences, typically
the input to output delay is 205ns at TA =25°C, one worst case watchdog clock cycle shorter (see chapter 2.2.3). The turn
OFF-signal is prioritized/dominant and will not show up this behavior.
Datasheet
14
Version 2.1, 2009-11-24