1ED020I12FTA Datasheet, PDF (13/27 Pages) Infineon Technologies AG – Single IGBT Driver IC

EICEDRIVER®
1ED020I12FTA
Pin Configuration and Functionality
OUT (Driver output)
Output pin to drive an IGBT. The voltage is switched between VEE2 and VCC2. In normal operating mode Vout
is controlled by IN+, IN- and /RST. During error mode (UVLO, internal error or DESAT) Vout is set to VEE2
independent of the input control signals.
VCC2
Positive power supply pin of the output side.
TLSET (Two-Level turn-off)
Setting up the timing (with ext. capacitor) and voltage reference (with ext. Zener diode) for the two-level turn-off,
see figure 5.
Preliminary Datasheet
11
Version 1.2, 2010-05-21