1ED020I12FA2 Datasheet, PDF (13/27 Pages) Infineon Technologies AG – Single IGBT Driver IC

1ED020I12FA2
Single IGBT Driver IC
Electrical Parameters
3) With respect to VEE2.
4) Output IC power dissipation is derated linearly at 8.5 mW/°C above 68°C. Input IC power dissipation does not require
derating. See Figure 10 for reference layouts for these thermal data. Thermal performance may change significantly
with layout and heat dissipation of components in close proximity.
5) According to EIA/JESD22-A114-B (discharging a 100 pF capacitor through a 1.5 kΩ series resistor).
5.2
Operating Parameters
Note:
Within the operating range the IC operates as described in the functional description. Unless
otherwise noted all parameters refer to GND1.
Table 3 Operating Parameters
Parameter
Symbol
Values
Unit
Min.
Max.
Positive power supply output side V_VCC2
13
20
V
Negative power supply output side V_VEE2
-12
0
V
Maximum power supply voltage
V_max2
–
28
V
output side
(V_VCC2 - V_VEE2)
Positive power supply input side V_VCC1
4.5
5.5
V
Logic input voltages
(IN+,IN-,RST)
V_LogicIN
-0.3
5.5
V
Pin CLAMP voltage
V_CLAMP
V_VEE2-0.3
V_VCC22)
V
Pin DESAT voltage
V_DESAT
-0.3
V_VCC2
V
Pin TLSET voltage
V_TLSET
-0.3
V_VCC2
V
Ambient temperature
T_A
-40
125
°C
Common mode transient
immunity³⁾
|DV_ISO/dt| –
50
kV/μs
1) With respect to GND2.
2) May be exceeded during short circuit clamping.
3) The parameter is not subject to production test - verified by design/characterization
Note
1)
1)
–
–
–
–
1)
1)
–
@ 500 V
5.3
Recommended Operating Parameters
Note:
Unless otherwise noted all parameters refer to GND1.
Table 4 Recommended Operating Parameters
Parameter
Symbol Value
Unit
Positive power supply output side V_VCC2
15
V
Negative power supply output side V_VEE2
-8
V
Positive power supply input side V_VCC1
5
V
1) With respect to GND2.
Data Sheet
13
Note
1)
1)
–
Rev. 3.0
2016-04-04