V23818-C18-L47 Datasheet, PDF (12/17 Pages) Infineon Technologies AG – Small Form Factor Single Mode 1300 nm Multirate up to 155 Mbit/s Transceiver 2x5 Pinning with LC™ Connector

V23818-C18-Lxx/L4xx
Eye Safety
Eye Safety
This laser based single mode transceiver is a Class 1 product.
It complies with IEC 60825-1 and FDA 21 CFR 1040.10 and 1040.11.
To meet laser safety requirements the transceiver shall be operated within the Absolute
Maximum Ratings.
Attention: All adjustments have been made at the factory prior to shipment of the
devices. No maintenance or alteration to the device is required.
Tampering with or modifying the performance of the device will result
in voided product warranty.
Note: Failure to adhere to the above restrictions could result in a modification that is
considered an act of “manufacturing”, and will require, under law, recertification of
the modified product with the U.S. Food and Drug Administration (ref. 21 CFR
1040.10 (i)).
Laser Data
Wavelength
Total Output Power
(as defined by IEC: 7 mm aperture at 14 mm distance)
Total Output Power
(as defined by FDA: 7 mm aperture at 20 cm distance)
Beam Divergence
1300 nm
2 mW
180 µW
4°
FDA
Complies with 21 CFR
1040.10 and 1040.11
Figure 4 Required Labels
IEC
Class 1 Laser Product
File: 1401
Indication of
laser aperture
and beam
Figure 5 Laser Emission
Data Sheet
Tx
10 9 8 7 6
Top view
Rx
12345
File: 1332
12
2003-06-06