1ED020I12-FT Datasheet, PDF (12/32 Pages) Infineon Technologies AG – 1ED020I12-FT

EiceDRIVER™
1ED020I12-FT
Pin Configuration and FunctionalityPin Functionality
GND2 Reference Ground
Reference ground of the output chip.
OUT Driver Output
Output pin to drive an IGBT. The voltage is switched between VEE2 and VCC2. In normal operating mode Vout
is controlled by IN+, IN- and /RST. During error mode (UVLO, internal error or DESAT) Vout is set to VEE2
independent of the input control signals.
VCC2
Positive power supply pin of the output side.
TLSET Two Level Turn Off Adjust
Circuitry at TLSET adjust the two level turn off time with an external capacitor to GND2 and the two level voltage
with an external Zener diode to GND2, for wave forms please see Figure 9.
Final Data Sheet
12
Rev 2.0, 2012-07-31