TLE4963-1M_16 Datasheet, PDF (11/17 Pages) Infineon Technologies AG – High Precision Automotive Hall Effect Latch for 5V Applications

TLE4963-1M
Specification
3.2
Absolute Maximum Ratings
Table 3 Absolute Maximum Rating Parameters
Parameter
Symbol
Values
Unit Note or Test Condition
Min.
Typ.
Max.
Supply voltage
Output voltage
Junction
temperature¹⁾
V_DD
-0.3
V_Q
-0.5
T_J
-40
6
V
6
V
155
°C for 2000h (not additive)
165
for 1000h (not additive)
175
for 168h (not additive)
195
for 3 x 1h (additive)
Thermal resistance R_thJA
Junction ambient
300
K/W for PG-SOT23-3-15 (2s2p)
Thermal resistance R_thJL
Junction lead
100
K/W for PG-SOT23-3-15
1) This lifetime statement is an anticipation based on an extrapolation of Infineon’s qualification test results. The actual
lifetime of a component depends on its form of application and type of use etc. and may deviate from such statement.
The lifetime statement shall in no event extend the agreed warranty period.
Attention: Stresses above the max. values listed here may cause permanent damage to the device.
Exposure to absolute maximum rating conditions for extended periods may affect device
reliability. Maximum ratings are absolute ratings; exceeding only one of these values may
cause irreversible damage to the integrated circuit.
Calculation of the dissipated power P_DIS and junction temperature T_J of the chip (SOT23 example):
e.g. for: V_DD = 5 V, I_S = 2 mA, V_QSAT = 0.5 V, I_Q = 1 mA
Power dissipation: P_DIS = 5 V x 2 mA + 0.5 V x 1 mA = 10 mW + 0.5 mW = 10.5 mW
Temperature ΔT = R_thJA x P_DIS = 300 K/W x 10.5 mW = 3.15 K
For T_A = 150 °C: T_J = T_A + ΔT = 150 °C + 3.15 K = 153.15 °C
Table 4 ESD Protection¹⁾ (TA = 25°C)
Parameter
Symbol
Values
Unit Note or Test Condition
ESD voltage (HBM)²⁾
ESD voltage (CDM)³⁾
Min.
Typ.
Max.
V_ESD
-4
-1
4
kV R = 1.5 kΩ, C = 100 pF
1
kV
1) Characterization of ESD is carried out on a sample basis, not subject to production test.
2) Human Body Model (HBM) tests according to ANSI/ESDA/JEDEC JS-001.
3) Charged Device Model (CDM), ESD susceptibility according to JEDEC JESD22-C101.
Data Sheet
11
Revision 1.0 2016-01-12