XC2797X Datasheet, PDF (107/147 Pages) Infineon Technologies AG – 16/32-Bit Single-Chip Microcontroller with 32-Bit Performance

XC2797X
XC2000 Family Derivatives / High Line
Electrical Parameters
Conditions for t_SSO Timing Measurement
The time required for the transition from Stopover to Stopover Waked-Up mode is
called t_SSO. It is measured under the following conditions:
Precondition: The Stopover mode has been entered using the procedure defined in the
Programmer’s Guide.
Start condition: Pin toggle on ESR pin triggering the startup sequence.
End condition: External pin toggle caused by first user instruction executed from PSRAM
after startup.
Coding of bit fields LEVxV in SWD and PVC Configuration Registers
Table 22 Coding of bit fields LEVxV in Register SWDCON0
Code
Default Voltage Level Notes¹⁾
0000_B
2.9 V
0001_B
3.0 V
LEV1V: reset request
0010_B
3.1 V
0011_B
3.2 V
0100_B
3.3 V
0101_B
3.4 V
0110_B
3.6 V
0111_B
4.0 V
1000_B
4.2 V
1001_B
4.5 V
LEV2V: no request
1010_B
4.6 V
1011_B
4.7 V
1100_B
4.8 V
1101_B
4.9 V
1110_B
5.0 V
1111_B
5.5 V
1) The indicated default levels are selected automatically after a power reset.
Data Sheet
107
V1.2, 2010-09