TLE7237GS Datasheet, PDF (10/36 Pages) Infineon Technologies AG – 8 Channel High-Side and Low-Side Relay Switch

TLE7237GS
Electrical Characteristics
4
Electrical Characteristics
4.1
Absolute Maximum Ratings ¹⁾
Stresses above the ones listed here may affect device reliability or may cause permanent damage to the device.
The values below are not considering combinations of different maximum conditions at one time
T_j = -40 °C to +150 °C; all voltages with respect to ground, positive current flowing into pin
(unless otherwise specified)
Absolute Maximum Ratings¹⁾
Pos. Parameter
Symbol Limit Values Unit Test Conditions
min. max.
Power Supply
4.1.1 Power supply voltage
V_bb
-16
40
4.1.2 Digital supply voltage
V_DD
-0.3 5.5
4.1.3 Power supply voltage for full short circuit V_bat(SC) 0
28
protection (single pulse)
(T_j = -40 °C … 150 °C)
Power Stages
V -16V max. 2 minutes
V–
V–
4.1.4 Load current
channel 0, 1, 4, 5, 6, 7
I_L
A–
-0.5 0.5
channel 2, 3
-0.25 0.25
4.1.5 Voltage at power transistor
V_DS
–
41
4.1.6 Power transistor’s source voltage
V_{Out_S}
-16
–
4.1.7 Power transistor’s drain voltage
V_{Out_D}
–
41
4.1.8 Max. energy dissipation one channel single E_AS
pulse for ch. 0, 1, 4, 5, 6, 7
V–
V–
V–
mJ ²⁾
–
65
T_j(0) = 105 °C
I_D(0) = 0.35 A
–
50
T_j(0) = 150 °C
I_D(0)= 0.250 A
4.1.9 Maximum energy dissipation one channel E_AR
repetitive pulses for ch. 0, 1, 4, 5, 6, 7
mJ ²⁾
1 · 10⁴ cycles
–
18
T_j(0) = 105 °C
I_D(0) = 0.250 A
1 · 10⁶ cycles
–
13
T_j(0) = 105 °C
I_D(0) = 0.220 A
4.1.10 Max. energy dissipation one channel single E_AS
mJ ²⁾
pulse for ch. 2,3
–
50
–
30
T_j(0) = 105 °C
I_D(0) = 0.250 A
T_j(0) = 150 °C
I_D(0)= 0.250 A
1) not subject to production test
Data Sheet
10
Rev. 1.0, 2008-10-30