V23806-A34-C2 Datasheet, PDF (1/5 Pages) Infineon Technologies AG – Single Mode FDDI 1x9 Transceiver with SC Receptacle

V23806-A34-C2
Single Mode FDDI 1x9 Transceiver with SC Receptacle
Dimensions in (mm) inches
View Z
(Lead cross section
and standoff size)
(0.73±0.1)
.028±.004
(1.5±0.1)
.06±.004
(11.5 max)
.453 max.
(2) .080
(4±0.2) .158±.008
PC board thickness
(0.5) typ.
11x ∅0.1 M
∅.004 M
.020 typ.
Z
(0.25) typ.
.010 typ.
(25.4–0.1)
9x
1–.004
∅0.3 M A
∅.012 M A
8x 2.54=20.32
8x .100 =.800
Optical
Centerline
(7.42—0.15)
.292—.006
(9.6+0.1)
.378+.004
PC board
(0.75±0.1)
.030±.004
6.375
.251
2x ^{∅0.3 M A}
∅.012 M A
(1.4—0.05)
.055—.002
DUPLEX
SC
RECEPTACLE
Top View
Rx
8x 2.54=20.32
8x .100 =.800
12.7
.500
Tx
(20 —1)
.787 —.040
(2.54)
.100
(2.54)
.100
A
20.32
(15.88±0.5)
(12.6±0.3)
.800
.625±.020
.496±.012
(38.62±0.1)
1.52±.004
9x (0.8) min.
.032 min.
11x ∅0.1 M
∅.004 M
20.32
.800
(1.9±0.1)
.075±.004
2x
V23806-A34-C2
FEATURES
• Compliant with existing FDDI standard
• Compact integrated transceiver unit with
– MQW laser diode transmitter
– InGaAs PIN photodiode receiver
– Duplex SC receptacle
• Class 1 FDA and IEC laser safety compliant
• FDA Accession No. 9520890-21
• Single power supply (5 V)
• Signal detect indicator
• PECL differential inputs and outputs
• Process plug included
• Wave solderable and washable with process
plug inserted
• Industry standard multisource 1x9 footprint
Absolute Maximum Ratings
Exceeding any one of these values may destroy the device
immediately.
Package Power Dissipation⁽¹⁾................................................1 W
Supply Voltage (V_CC–V_EE)...................................................... 6 V
Data Input Levels........................................................V_CC+0.5 V
Differential Data Input Voltage ............................................ 2.5 V
Operating Ambient Temperature .............................0°C to 70°C
Storage Ambient Temperature ............................ –40°C to 85°C
Soldering Conditions, Temp/Time
(MIL-STD 883C, Method 2003) ............................. 250°C/5.5s
Note
1. For V_CC–V_EE (min., max.). 50% duty cycle. The supply current does
not include the load drive current of the receiver output. Add max.
45 mA for the three outputs. Load is 50 Ω to V_CC–2 V.
Fiber Optics
MARCH 2000