TLE6232GP Datasheet, PDF (1/19 Pages) Infineon Technologies AG – Smart Six Channel Low-Side Switch

Data Sheet TLE 6232 GP
Smart Six Channel Low-Side Switch
Features
Product Summary
• Short Circuit Protection up to 24 V
• Over-temperature Protection
Supply voltage
•
•
Over-voltage Protection
16 bit Serial Data Input and Diagnostic
Drain source clamping voltage
Output (2 bit/ch. acc. SPI protocol)
On resistance
• Direct Parallel Control of all six Chan-
nels for PWM Applications
• General Fault Flag
• Low Quiescent Current
Output current (Channel 1-4)
(Channel 5,6)
• Compatible with 3V Micro Controllers
• Electrostatic Discharge (ESD) Protection
• Parallel Inputs High or Low Active Programmable
V_S
V_DS(AZ)typ.
R_ON1-4
R_{ON 5,6}
I_D(NOM)
I_D(NOM)
4.5 – 5.5 V
53
V
0.25 Ω
0.45 Ω
2
A
1
A
Application
• µC Compatible Power Switch for 12 V and 24V Applications
• Switch for Automotive and Industrial System
• Solenoids, Relays and Resistive Loads
• Robotic Controls
P-DSO 36-12
Ordering Code:
General description
Q67007A9397A702
Six Channel Low-Side Switch in Smart Power Technology (SPT) with a
Serial Peripheral Interface (SPI) and six open drain DMOS output stages. The TLE 6232 GP is pro-
tected by embedded protection functions and designed for automotive and industrial applications. The
output stages are controlled via an SPI Interface. Additionally all six channels can be controlled direct
in parallel for PWM applications. Therefore the TLE 6232 GP is particularly suitable for engine man-
agement and powertrain systems.
Block Diagram
PRG
GND VS
RESET VS
FAULT
IN1
IN6
as Ch. 1
as Ch. 1
as Ch. 1
as Ch. 1
as Ch. 1
LOGIC
V_BB
Protection
Functions
Output Stage
OUT1
16
1
6
SCLK
SI
6
Serial Interface
SPI
Output Control
Buffer
6
OUT6
CS
SO
GND
V1.2
Page 1
08.Oct. 2003