|
TLE6214L Datasheet, PDF (1/17 Pages) Infineon Technologies AG – Smart Dual Current Sense Switch | |||
|
Preliminary Datasheet TLE 6214 L
Smart Dual Current Sense Switch
Basic Features
Product Summary
⢠Short circuit protection
⢠DMOS Overtemperature protection
Supply voltage
⢠Overvoltage protection
Drain source voltage
⢠Open load detection
On resistance
⢠Current limitation
⢠Low quiescent current mode
⢠3,3V µC compatible input
⢠Electrostatic discharge (ESD) protection
VS
VDS(AZ)
RON
4.5 â 5.5 V
48 - 60 V
0.18 â¦
P-DSO-12-4
Specific Features
⢠Proportional load current sense
⢠IC Overtemperature warning
⢠8-Bit SPI (for diagnosis and control)
⢠Short to GND detection
⢠Programmable overload behaviour
Ordering Code :Q....
General Description
Dual Current Sense Low-Side Switch in Smart Power Technology (SPT) with two open drain DMOS
output stages. The TLE 6214 L is protected by embedded protection functions and designed for auto-
motive applications. The output stages can be controlled directly by parallel inputs for PWM applica-
tions (e.g. Oxygen Probe Heater, Stepper Motor) or by SPI. All output stages can provide a load current
proportional sense signal. Diagnosis is done by an 8 bit SPI or by one status output per channel.
Block Diagram
VS
IS1/ IS2/
Fault / ST1
IN1
IN2
SI
M ux
SO / ST2
SCLK
CS
SPI
Interface
8 bit
GND
V2 Preliminary
Page 1
Channel 1
Output Stage
OUT1
Normal function
SCB/Overload
Open load
Short to ground
Overtemperature
Channel 2
GND
OUT2
25.06.2003
|
▷ |