TLE5206-2G Datasheet, PDF (1/23 Pages) Infineon Technologies AG – 5-A H-Bridge for DC-Motor Applications

5-A H-Bridge for DC-Motor Applications
TLE 5206-2
1
Overview
1.1 Features
• Delivers up to 5 A continuous 6 A peak current
• Optimized for DC motor management applications
• Operates at supply voltages up to 40 V
• Very low R_{DS ON}; typ. 200 mΩ @ 25 °C per switch
• Output full short circuit protected
• Overtemperature protection with hysteresis
and diagnosis
• Short circuit diagnosis with open drain error flag
• Undervoltage lockout
• CMOS/TTL compatible inputs with hysteresis
• No crossover current
• Internal freewheeling diodes
• Wide temperature range; − 40 °C < T_j < 150 °C
Type
Ordering Code Package
TLE 5206-2
Q67000-A9290 P-TO220-7-11
TLE 5206-2GP Q67006-A9239 P-DSO-20-12
TLE 5206-2G Q67006-A9323 P-TO263-7-1
TLE 5206-2S Q67000-A9326 P-TO220-7-12
P-TO220-7-11
P-DSO-20-12
P-TO263-7-1
Description
The TLE 5206-2 is an integrated power H-bridge with
DMOS output stages for driving DC-Motors. The part is
built using the SIEMENS multi-technology process
SPT^® which allows bipolar and CMOS control circuitry
plus DMOS power devices to exist on the same
monolithic structure.
Operation modes forward (cw), reverse (ccw), brake
P-TO220-7-12
high and brake low are invoked from just two control pins with TTL/CMOS compatible
levels. The combination of an extremely low R_{DS ON} and the use of a power IC package
with low thermal resistance and high thermal capacity helps to minimize system power
dissipation. A blocking capacitor at the supply voltage is the only external circuitry due
to the integrated freewheeling diodes.
Data Sheet
1
2001-06-19