IM811 Datasheet, PDF (2/7 Pages) ILSI America LLC – Direct pin to pin drop-in replacement for industry-standard packages

MEMS Oscillator, Ultra Performance, High Freq., LVCMOS/ HCMOS Compatible, 80.0 MHz to 220.0MHz IM811 Series
Ordering Information:
Packages
IM811B – 5.0 x 3.2
IM811C – 3.2 x 2.5
IM811D – 2.5 x 2.0
Input Voltage
1 = +1.8 V
6 = +2.5 V
2 = +2.7 V
7 = +3.0 V
3 = +3.3 V
Part Number Guide
Operating
Output Drive Stability
Temperature
Strength
(ppm)
1 = 0ºC to +70ºC
2 = -40ºC to +85ºC
3 = -20ºC to +70ºC
- = Default
E = ±10
F = ±20
A = ±25
B = ±50
Select Function
H = Tri-state
S = Standby
Frequency
- Frequency
Sample Part Number: IM811C-31-FS-100.0000MHz
This 100.0000 MHz oscillator in a 3.2 x 2.5 package with stability ±20 ppm from 0ºC to +70ºC using a supply voltage of +3.3 V. With Pin 1 function as
Standby. Output Drive Strength is only set to the default level.
Sample Part Number: IM811D-13-AH-125.0000MHz
This 125.0000 MHz oscillator in a 2.5 x 2.0 package with stability ±25 ppm from -20ºC to +70ºC using a supply voltage of +1.8 V. With Pin 1 function as
Tri-state. Output Drive Strength is only set to the default level.
Notes:
 Not all options are available at all frequencies and temperatures ranges.
 Please consult with sales department for any other parameters or options.
 Oscillator specification subject to change without notice.
Phase Noise:
Figure 1: Phase Noise, 156.25 MHz, +3.3 V LVCMOS Output
ILSI America Phone [phone] ● Fax [phone] ●email: [e-mail] ●
www.ilsiamerica.com
Specifications subject to change without notice
Rev: 01/30/16_A
Page 2 of 7