IM811 Datasheet, PDF (1/7 Pages) ILSI America LLC – Direct pin to pin drop-in replacement for industry-standard packages

MEMS Oscillator, Ultra Performance, High Freq., LVCMOS/ HCMOS Compatible, 80.0 MHz to 220.0MHz IM811 Series
Features:
 MEMS Technology
 Direct pin to pin drop-in replacement for industry-standard packages
 Ultra-low phase jitter: 0.5 pSec (12 kHz to 20 MHz)
 LVCMOS/HCMOS Compatible Output
 Industry-standard package 2.5 x 2.0, 3.2 x 2.5, and 5.0 x 3.2 mm x mm
 Pb-free, RoHS and REACH compliant
 Fast delivery times
Typical Applications:
 Fibre Channel
 Server and Storage
 GPON, EPON
 100M / 1G /10G Ethernet
Electrical Specifications:
Frequency Range
80.000 MHz to 220.000MHz
Frequency Stability
See Part Number Guide
Inclusive of Initial Tolerance, Operating Temperature Range, Load, and
Voltage
Operating Temperature
See Part Number Guide
Supply Voltage (Vdd) ±10%
See Part Number Guide
Current Consumption
34 mA typ./ 36 mA max
30 mA typ./ 33 mA max
No load condition, f = 100 MHz, Vdd = +2.5 V, +2.8 V or +3.3 V
No load condition, f = 100 MHz, Vdd = +1.8V
OE Disable Current
31 mA max
30 mA max
Vdd = +2.5 V, +2.8 V or +3.3 V, OE = GND
Vdd = +1.8 V, OE = GND
Standby Current
70 µA max
10 µA max
Vdd = +2.5 V, +2.8 V or +3.3 V, ST = GND
Vdd = +1.8 V, ST = GND
Waveform Output
LVCMOS/HCMOS
Symmetry
45%/55%
40%/60%
F = less than 165 MHz all Vdds
F = greater than 165 MHz all Vdds
Rise / Fall Time
1.2 nSec typ./ 2.0 nSec max
15 pF Load, 10% to 90% of Vdd
Logic “1”
90% of Vdd min
Logic “0”
10% of Vdd max
Input Voltage High
70% of Vdd min
Pin 1, OE or ST
Input Voltage Low
30% of Vdd max
Pin 1, OE or ST
Input Pull-up Impedance
100 kΩ typ./ 250 kΩ max
2.0 MΩ min
Pin 1, OE logic high or logic low, or ST logic high
Pin 1, ST logic low
Startup Time
7 mSec typ./ 10 mSec max
Measured from the time Vdd reaches its rated minimum values
OE Enable/Disable Time
115 nSec max
F= 80 MHz, For other frequencies, T_oe = 100 nSec = 3 cycles
Resume Time
10 mSec max
In standby mode, measured from the time ST pin crosses 50% threshold.
RMS Period Jitter
1.5 pSec typ./ 2.0 pSec max
2.0 pSec typ./ 3.0 pSec max
F = 156.25 MHz, Vdd = +2.5 V,+2.8 V or +3.3 V
F = 156.25 MHz, Vdd = +1.8 V
RMS Phase Jitter (random)
0.5 pSec typ./ 1.0 pSec max
F = 156.25 MHz, Integration bandwidth = 12 kHz to 20 MHz
First year Aging
±1.5 ppm
At +25ºC ±2ºC
10-years Aging
±5.0 ppm
At +25ºC ±2ºC
Notes:
 All min and max limits are specified over temperature and rated operating voltage with 15pF output unless otherwise stated.
 Typical values are at +25ºC and nominal supply voltage.
Storage Temperature
Absolute Maximum Limits
Supply Voltage (Vdd)
Electrostatic Discharge
Solder Temperature (follow standard Pb free soldering guidelines)
Junction Temperature
-65ºC to +150ºC
-0.5 VDC to 4.0 VDC
2000 V max
260ºC max
150ºC max
ILSI America Phone [phone] ● Fax [phone] ●email: [e-mail] ●
www.ilsiamerica.com
Specifications subject to change without notice
Rev: 01/30/16_A
Page 1 of 7