8343-01 Datasheet, PDF (7/13 Pages) Integrated Device Technology – Maximumoutputfrequency

8343-01 DATA SHEET
Table 5C. AC Electrical Characteristics, V_DD = V_DD2 = 3.3V ±5%, V_DD1 = 2.5V ±5%, T_A = 0°C to 70°C¹
Symbol
Parameter
Test Conditions
Minimum
Typical
Maximum
f_MAX
Output Frequency
200
tsk(o)
Output Skew²
Measured on rising edge @ V_DDx/2
250
NOTE 1: All parameters measured at f_MAX unless noted otherwise.
NOTE 2: Defined as skew across outputs at the same supply voltages within a bank, and with equal load conditions.
Units
MHz
ps
Table 5D. AC Electrical Characteristics, V_DD 3.3V ±5%, V_DD1 = V_DD2 = 2.5V ±5%, T_A = 0°C to 70°C¹
Symbol
Parameter
Test Conditions
Minimum
Typical
Maximum Units
f_MAX
t_pLH
tsk(o)
tsk(pp)
t_R / t_F
odc
Output Frequency
Propagation Delay²
Output Skew^{3, 4}
Part-to-Part Skew^{4, 5}
Output Rise/ Fall Time
Output Duty Cycle
f  200MHz
2.0
Measured on rising edge @ V_DDx/2
Measured on rising edge @ V_DDx/2
20% to 80%
0.4
f  133MHz
40
133
MHz
4.0
ns
250
ps
1
ns
1.0
ns
60
%
NOTE 1: All parameters measured at f_MAX unless noted otherwise.
NOTE 2: Measured from V_DD/2 of the input to V_DDx/2 of the output.
NOTE 3: Defined as skew between outputs at the same supply voltage and with equal load conditions. Measured at V_DDx/2.
NOTE 4: This parameter is defined in accordance with JEDEC Standard 65.
NOTE 5: Defined as skew between outputs on different devices operating at the same supply voltages and with equal load conditions. Using
the same type of inputs on each device, the outputs are measured at V_DDx/2.
REVISION B 08/25/14
7
LOW SKEW, 1-TO-16 LVCMOS / LVTTL FANOUT BUFFER