ICS85411I Datasheet, PDF (4/16 Pages) Integrated Device Technology – LOW SKEW, 1-TO-2 DIFFERENTIAL-TOLVDS FANOUT BUFFER

ICS85411I
LOW SKEW, 1-TO-2 DIFFERENTIAL-TO-LVDS FANOUT BUFFER
TABLE 4. AC CHARACTERISTICS, V_DD = 3.3V±10% TA = -40°C TO 85°C
Symbol Parameter
Test Conditions
Minimum Typical Maximum
f_MAX
t_PD
tsk(o)
Output Frequency
Propagation Delay; NOTE 1
Output Skew; NOTE 2, 4
650
1.5
2.5
25
tsk(pp) Part-to-Part Skew; NOTE 3, 4
300
tjit
Buffer Additive Phase Jitter, RMS;
refer to Additive Phase Jitter Section
(12kHz to 20MHz)
0.05
t_R / t_F
Output Rise/Fall Time
20% to 80% @ 50MHz
150
350
odc
Output Duty Cycle
f > 500MHz
46
54
f ≤ 500MHz
48
52
All parameters measured at IJ 650MHz unless noted otherwise.
NOTE 1: Measured from the differential input crossing point to the differential output crossing point.
NOTE 2: Defined as skew between outputs at the same supply voltage and with equal load conditions.
Measured at the output differential cross points.
NOTE 3: Defined as skew between outputs on different devices operating at the same supply voltages
and with equal load conditions. Using the same type of inputs on each device, the outputs are measured
at the differential cross points.
NOTE 4: This parameter is defined in accordance with JEDEC Standard 65.
Units
MHz
ns
ps
ps
ps
ps
%
%
IDT^™ / ICS^™ DIFFERENTIAL-TO-LVDS FANOUT BUFFER
4
ICS85411AMI REV. B NOVEMBER 7, 2007