ICS8533I-01 Datasheet, PDF (3/17 Pages) Integrated Device Technology – DIFFERENTIAL-TO-3.3V LVPECL FANOUT BUFFER 3.3V operating supply

ICS8533I-01
LOW SKEW, 1-TO-4
DIFFERENTIAL-TO-3.3V LVPECL FANOUT BUFFER
TABLE 3A. CONTROL INPUT FUNCTION TABLE
Inputs
Outputs
CLK_EN
CLK_SEL
Selected Source
Q0:Q3
nQ0:nQ3
0
0
CLK, nCLK
Disabled; LOW
Disabled; HIGH
0
1
PCLK, nPCLK
Disabled; LOW
Disabled; HIGH
1
0
CLK, nCLK
Enabled
Enabled
1
1
PCLK, nPCLK
Enabled
Enabled
After CLK_EN switches, the clock outputs are disabled or enabled following a rising and falling input clock edge
as shown in Figure 1. In the active mode, the state of the outputs are a function of the CLK , nCLK and PCLK, nPCLK
inputs as described
in Table 3B.
nCLK, nPCLK
CLK, PCLK
CLK_EN
Disabled
Enabled
nQ0:nQ3
Q0:Q3
FIGURE 1. CLK_EN TIMING DIAGRAM
TABLE 3B. CLOCK INPUT FUNCTION TABLE
Inputs
CLK or PCLK nCLK or nPCLK
Outputs
Q0:Q3
nQ0:nQ3
Input to Output Mode
Polarity
0
1
LOW
HIGH
Differential to Differential
Non Inverting
1
0
HIGH
LOW
Differential to Differential
Non Inverting
0
Biased; NOTE 1
LOW
HIGH
Single Ended to Differential Non Inverting
1
Biased; NOTE 1
HIGH
LOW
Single Ended to Differential Non Inverting
Biased; NOTE 1
0
HIGH
LOW
Single Ended to Differential
Inverting
Biased; NOTE 1
1
LOW
HIGH
Single Ended to Differential
Inverting
NOTE 1: Please refer to the Application Information section, "Wiring the Differential Input to Accept Single Ended Levels".
8533AGI-01
3
REV. A DECEMBER 6, 2007