7134SA55J Datasheet, PDF (3/12 Pages) Integrated Device Technology – HIGH-SPEED 4K x 8 DUAL-PORT STATIC SRAM

IDT7134SA/LA
High-Speed 4K x 8 Dual-Port Static SRAM
Military, Industrial and Commercial Temperature Ranges
Absolute Maximum Ratings⁽¹⁾
Recommended Operating
Symbol
Rating
Commercial Military Unit ^{Temperature and Supply Voltage(1,2)}
& Industrial
Grade
Ambient
GND
Vcc
VTERM⁽²⁾ Terminal Voltage
-0.5 to +7.0 -0.5 to +7.0 V
Temperature
with Respect
to GND
Military
-55^OC to +125^OC
0V
5.0V + 10%
TBIAS
Temperature
Under Bias
TSTG
Storage
Temperature
PT⁽³⁾
Power
Dissipation
-55 to +125 -65 to +135 ^oC
Commercial
0^OC to +70^OC
0V
5.0V + 10%
Industrial
-40^OC to +85^OC
0V
5.0V + 10%
-65 to +150 -65 to +150 ^oC
NOTES:
2720 tbl 03
1.5
1.5
W
1. This is the parameter TA. This is the "instant on" case temperature.
IOUT
DC Output
Current
50
50
mA
NOTES:
2720 tbl 01
1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may
cause permanent damage to the device. This is a stress rating only and functional
operation of the device at these or any other conditions above those indicated in the
operational sections of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect reliability.
2. VTERM must not exceed Vcc + 10% for more than 25%of the cycle time or 10 ns
maximum, and is limited to < 20mA for the period of VTERM > Vcc +10%.
3. VTERM = 5.5V.
Capacitance⁽¹⁾ (TA = +25°C, f = 1.0MHz)
Symbol
Parameter
Conditions⁽²⁾ Max. Unit
CIN Input Capacitance
VIN = 3dV
11 pF
Recommended DC Operating
Conditions
Symbol
Parameter
Min. Typ. Max. Unit
VCC Supply Voltage
4.5 5.0 5.5 V
GND Ground
0
0
0
V
VIH Input High Voltage
2.2
____
6.0⁽²⁾
V
VIL Input Low Voltage
-0.5⁽¹⁾
____
0.8
V
NOTES:
1. VIL (min.) > -1.5V for pulse width less than 10ns.
2. VTERM must not exceed Vcc + 10%.
2720 tbl 04
COUT Output Capacitance
VOUT = 3dV
11 pF
NOTES:
2720 tbl 02
1. This parameter is determined by device characterization but is not production
tested.
2. 3dV references the interpolated capacitance when the input and output signals
switch from 0V to 3V and from 3V to 0V.
DC Electrical Characteristics Over the Operating
Temperature and Supply Voltage Range (VCC = 5V ± 10%)
7134SA
Symbol
Parameter
Test Conditions
Min.
Max.
|ILI|
Input Leakage Current⁽¹⁾
VCC = 5.5V, VIN = 0V to VCC
___
10
|ILO|
Output Leakage Current
CE - VIH, VOUT = 0V to VCC
___
10
VOL
Output Low Voltage
IOL = 6mA
___
0.4
IOL = 8mA
___
0.5
VOH
Output High Voltage
IOH = -4mA
2.4
___
NOTES:
1. At Vcc < 2.0V input leakages are undefined.
7134LA
Min.
Max.
___
5
___
5
___
0.4
___
0.5
2.4
___
Unit
µA
µA
V
V
V
2720 tbl 05
3