ICS2305 Datasheet, PDF (1/9 Pages) Integrated Circuit Systems – 3.3 VOLT ZERO DELAY, LOW SKEW BUFFER

DATASHEET
3.3 VOLT ZERO DELAY LOW SKEW BUFFER
ICS2305
Description
Features
The ICS2305 is a low phase noise, high-speed PLL
based, low-skew zero delay buffer. Based on IDT’s
proprietary low jitter Phase Locked Loop (PLL)
techniques, the device provides four low skew outputs
at speeds up to 133 MHz at 3.3 V. The outputs can be
generated from the PLL (for zero delay), or directly from
the input (for testing), and can be set to tri-state mode
or to stop at a low level. The PLL feedback is on-chip
and is obtained from the CLKOUT pad.
The ICS2305 is available in two different versions. The
ICS2305-1 is the base part. The ICS2305-1H is a high
drive version with faster rise and fall times.
• Clock outputs from 10 to 133 MHz
• Zero input-output delay
• Four low skew (<250 ps) outputs
• Device-to-device skew <700 ps
• Full CMOS outputs with 25 mA output drive
capability at TTL levels
• 5 V tolerant CLKIN
• Tri-state mode for board-level testing
• Advanced, low power, sub-micron CMOS process
• Operating voltage of 3.3 V
• Industrial temperature range available
• Packaged in 8-pin SOIC
• Available in Pb (lead ) free package
Block Diagram
NOTE: EOL for non-green parts to occur on
5/13/10 per PDN U-09-01
VDD
CLKIN
PLL
GND
CLKOUT
CLK1
CLK2
CLK3
CLK4
IDT™ / ICS™ 3.3 VOLT ZERO DELAY LOW SKEW BUFFER
1
ICS2305
REV E 081709