ICS83052I Datasheet, PDF (9/12 Pages) Integrated Circuit Systems – 2:1, SINGLE-ENDED MULTIPLEXER

Integrated
Circuit
Systems, Inc.
ICS83052I
2:1, SINGLE-ENDED MULTIPLEXER
APPLICATION INFORMATION
RECOMMENDATIONS FOR UNUSED INPUT AND OUTPUT PINS
INPUTS:
OUTPUTS:
CLK INPUT:
For applications not requiring the use of the test clock, it can
be left floating. Though not required, but for additional
protection, a 1kΩ resistor can be tied from the CLK input to
ground.
LVCMOS OUTPUT:
All unused LVCMOS output can be left floating. We
recommend that there is no trace attached.
CONTROL PINS:
All control pins have internal pull-ups or pull-downs; additional
resistance is not required but can be added for additional
protection. A 1kΩ resistor can be used.
RELIABILITY INFORMATION
TABLE 6. θ_JAVS. AIR FLOW TABLE FOR 8 LEAD TSSOP
θ_JA by Velocity (Meters per Second)
Multi-Layer PCB, JEDEC Standard Test Boards
0
101.7°C/W
1
90.5°C/W
2.5
89.8°C/W
TRANSISTOR COUNT
The transistor count for ICS83052I is: 967
83052AGI
www.icst.com/products/hiperclocks.html
10
REV. A AUGUST 2, 2005