ICS83054I Datasheet, PDF (5/13 Pages) Integrated Circuit Systems – 4 : 1, SINGLE-ENDED MULTIPLEXER

Integrated
Circuit
Systems, Inc.
ICS83054I
4:1, SINGLE-ENDED MULTIPLEXER
TABLE 5B. AC CHARACTERISTICS, V_DD = 3.3V ± 5%, V_DDO = 2.5V ± 5%, TA = -40°C TO 85°C
Symbol Parameter
Test Conditions
Minimum Typical Maximum Units
f_MAX
tp_LH
tp_HL
tsk(i)
Output Frequency
Propagation Delay, Low to High; NOTE 1
Propagation Delay, High to Low; NOTE 1
Input Skew; NOTE 2
250
MHz
2.5
2.8
3.1
ns
2.6
2.8
3.0
ns
45
150
ps
tsk(pp) Part-to-Part Skew; NOTE 2, 3
400
ps
t /t
RF
odc
Output Rise/Fall Time
Output Duty Cycle
20% to 80%
50
45
500
ps
55
%
MUX_ISOL MUX Isolation
@ 100MHz
45
dB
NOTE 1: Measured from V_DD/2 of the input to V_DDO/2 of the output.
NOTE 2: This parameter is defined in accordance with JEDEC Standard 65.
NOTE 3: Defined as skew between outputs on different devices operating a the same supply voltages and
with equal load conditions. Using the same type of input on each device, the output is measured at V_DDO/2.
TABLE 5C. AC CHARACTERISTICS, V_DD = 3.3V ± 5%, V_DDO = 1.8V ± 5%, TA = -40°C TO 85°C
Symbol Parameter
Test Conditions
Minimum Typical Maximum Units
f_MAX
tp_LH
tp_HL
tsk(i)
Output Frequency
Propagation Delay, Low to High; NOTE 1
Propagation Delay, High to Low; NOTE 1
Input Skew; NOTE 2
250
MHz
2.7
3.2
3.8
ns
2.8
3.3
3.8
ns
50
150
ps
tsk(pp) Part-to-Part Skew; NOTE 2, 3
475
ps
t_R / t_F
odc
Output Rise/Fall Time
Output Duty Cycle
20% to 80%
100
45
700
ps
55
%
MUX_ISOL MUX Isolation
@ 100MHz
45
dB
NOTE 1: Measured from V_DD/2 of the input to V_DDO/2 of the output.
NOTE 2: This parameter is defined in accordance with JEDEC Standard 65.
NOTE 3: Defined as skew between outputs on different devices operating a the same supply voltages and
with equal load conditions. Using the same type of input on each device, the output is measured at V_DDO/2.
83054AGI
www.icst.com/products/hiperclocks.html
5
REV. A JANUARY 3, 2006