ICS601-02 Datasheet, PDF (5/5 Pages) Integrated Circuit Systems – Low Phase Noise Clock Multiplier

ICS601-02
Low Phase Noise Clock Multiplier
Package Outline and Package Dimensions
(For current dimensional specifications, see JEDEC no. 95.)
INDEX
AREA
EH
h x 45°
D
A1
e
C
B
16 pin SOIC
Inches
Symbol Min Max
A 0.0532 0.0688
A1 0.0040 0.0098
B 0.0130 0.0200
C 0.0075 0.0098
D 0.3859 0.3937
E 0.1497 0.1574
e
.050 BSC
H 0.2284 0.2440
h 0.0099 0.0195
L 0.0160 0.0500
Millimeters
Min Max
1.35 1.75
0.10 0.24
0.33 0.51
0.19 0.24
9.80 10.00
3.80 4.00
1.27 BSC
5.80 6.20
0.25 0.50
0.41 1.27
A
L
Ordering Information
Part/Order Number
ICS601M-02I
ICS601M-02IT
ICS601M-02ILF
ICS601M-02ILFT
Marking
ICS601M-02I
ICS601M-02I
ICS601M-02IL
ICS601M-02IL
Shipping packaging
tubes
tape and reel
tubes
tape and reel
Package
16 pin narrow SOIC
16 pin narrow SOIC
16 pin narrow SOIC
16 pin narrow SOIC
Temperature
-40 to 85 °C
-40 to 85 °C
-40 to 85 °C
-40 to 85 °C
While the information presented herein has been checked for both accuracy and reliability, Integrated Circuit Systems,
Incorporated (ICS) assumes no responsibility for either its use or for the infringement of any patents or other rights of third
parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in
normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or
other extraordinary environmental requirements are not recommended without additional processing by ICS. ICS reserves the
right to change any circuitry or specifications without notice. ICS does not authorize or warrant any ICS product for use in life
support devices or critical medical instruments.
MDS 601-02 D
5
Revision 111204
Integrated Circuit Systems, Inc. • 525 Race Street • San Jose • CA•95126 • [phone]tel • www.icst.com