ICS9173-01 Datasheet, PDF (4/7 Pages) Integrated Circuit Systems – Video Genlock PLL

AV9173- 01
Absolute Maximum Ratings
V_DD (referenced to GND) . . . . . . . . . . . . . . . . 7.0 V
Operating Temperature under Bias . . . . . . . . . 0°C to +70°C
Storage Temperature . . . . . . . . . . . . . . . . . . . . – 65°C to +150°C
Voltage on I/O pins referenced to GND . . . . . GND – 0.5V to V_DD + 0.5V
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . 0.5 watts
Stresses above those listed under Absolute Maximum Ratings above may cause permanent damage to the device. This is a stress
rating only and functional operation of the device at these or any other conditions above those listed in the operational sections
of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect product
reliability.
Electrical Characteristic
V_DD = +5V ±5%, T_A = 0°C to 70° C, unless otherwise stated
DC CHARACTERISTICS
PARAMETER SYMBOL TEST CONDITIONS MIN
TYP
Input Low Voltage
VIL
VDD = 5V
—
—
Input High Voltage
VIH
VDD = 5V
2.0
—
Input Low Current
IIL
VIN = 0V
-5
—
Input High Current
IIH
Output Low Voltage¹ VOL
VIN = VDD
IOL = 8mA
-5
—
—
—
Output High Voltage¹ VOH1
IOH = -1mA,
VDD = 5.0V
VDD -0.4V —
Output High Voltage¹
Output High Voltage¹
VOH2
VOH3
IOH = -4mA,
VDD = 5.0V
IOH = -8mA
VDD -0.8V —
2.4
—
Supply Current
IDD
Unloaded, 50 MHZ
—
20
MAX
0.8
—
—
5
0.4
—
—
—
50
UNITS
V
V
µA
µA
V
V
V
V
mA
Notes:
1. Duty cycle measured at 1.4V.
2. Input Reference Frequency = 25 kHz, Output Frequency = 25 MHz. Jitter measured between adjacent vertical pixels.
3. CLK1 frequency applies for FS = 0. For FS = 1 condition, divide allowable CLK1 range by the factor of 4.
4