ICS8521 Datasheet, PDF (3/13 Pages) Integrated Circuit Systems – LOW SKEW, 1-TO-9 DIFFERENTIAL-TO-LVHSTL FANOUT BUFFER

Integrated
Circuit
Systems, Inc.
ICS8521
LOW SKEW, 1-TO-9
DIFFERENTIAL-TO-LVHSTL FANOUT BUFFER
TABLE 3A. CONTROL INPUT FUNCTION TABLE
Inputs
Outputs
CLK_EN
CLK_SEL
Selected Sourced
Q0 thru Q8
nQ0 thru nQ8
0
0
CLK, nCLK
Disabled; LOW
Disabled; HIGH
0
1
PCLK, nPCLK
Disabled; LOW
Disabled; HIGH
1
0
CLK, nCLK
Enabled
Enabled
1
1
PCLK, nPCLK
Enabled
Enabled
After CLK_EN switches, the clock outputs are disabled or enabled following a rising and falling input clock edge
as shown in Figure 1.
In the active mode, the state of the outputs are a function of the CLK, nCLK and PCLK, nPCLK inputs as described
in Table 3B.
nCLK, nPCLK
CLK, PCLK
Disabled
Enabled
CLK_EN
nQ0 - nQ8
Q0 - Q8
FIGURE 1: CLK_EN TIMING DIAGRAM
TABLE 3B. CLOCK INPUT FUNCTION TABLE
Inputs
CLK or PCLK nCLK or nPCLK
Outputs
Q0 thru Q8 nQ0 thru nQ8
Input to Output Mode
Polarity
0
1
LOW
HIGH
Differential to Differential
Non Inverting
1
0
HIGH
LOW
Differential to Differential
Non Inverting
0
Biased; NOTE 1
LOW
HIGH
Single Ended to Differential Non Inverting
1
Biased; NOTE 1
HIGH
LOW
Single Ended to Differential Non Inverting
Biased; NOTE 1
0
HIGH
LOW
Single Ended to Differential
Inverting
Biased; NOTE 1
1
LOW
HIGH
Single Ended to Differential
Inverting
NOTE 1: Please refer to the Application Information section on page 8, Figure 9, which discusses wiring the differential
input to accept single ended levels.
8521BY
www.icst.com/products/hiperclocks.html
3
REV. B JULY 31, 2001