IC62C1024AL Datasheet, PDF (4/9 Pages) Integrated Circuit Solution Inc – 128K x 8 Low Power CMOS SRAM

IC62C1024AL
ABSOLUTE MAXIMUM RATINGS⁽¹⁾
Symbol
VTERM
TBIAS
TSTG
PT
IOUT
Parameter
Terminal Voltage with Respect to GND
Temperature Under Bias
Storage Temperature
Power Dissipation
DC Output Current (LOW)
Value
Unit
–0.5 to + 7.0
V
–45 to + 85
°C
–65 to + 150
°C
1.5
W
20
mA
Notes:
1. Stress greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause
permanent damage to the device. This is a stress rating only and functional operation of the
device at these or any other conditions above those indicated in the operational sections of
this specification is not implied. Exposure to absolute maximum rating conditions for
extended periods may affect reliability.
CAPACITANCE^(1,2)
Symbol
Parameter
Conditions
Max.
Unit
CIN
Input Capacitance
VIN = 0V
6
pF
COUT
Output Capacitance
VOUT = 0V
8
pF
Notes:
1. Tested initially and after any design or process changes that may affect these parameters.
2. Test conditions: TA = 25°C, f = 1 MHz, Vcc = 5.0V.
DC ELECTRICAL CHARACTERISTICS (Over Operating Range)
Symbol Parameter
Test Conditions
Min.
Max.
Unit
VOH
Output HIGH Voltage VCC = Min., IOH = –1.0 mA
VOL
Output LOW Voltage
VCC = Min., IOL = 2.1 mA
VIH
Input HIGH Voltage
VIL
Input LOW Voltage⁽¹⁾
ILI
Input Leakage
GND ≤ VIN ≤ VCC
ILO
Output Leakage
GND ≤ VOUT ≤ VCC
2.4
—
V
—
0.4
V
2.2 VCC + 0.5 V
–0.3
0.8
V
Com. –2
2
µA
Ind. –10
10
Com. –2
2
µA
Ind. –10
10
Notes:
1. VIL = –3.0V for pulse width less than 10 ns.
POWER SUPPLY CHARACTERISTICS⁽¹⁾ (Over Operating Range)
Symbol Parameter
ICC
Vcc Dynamic Operating
Supply Current
Test Conditions
VCC = Max., CE = VIL
IOUT = 0 mA, f = fMAX
-35 ns
Min. Max.
Com. — 100
Ind. — 110
-45 ns
Min. Max.
— 90
— 100
-55 ns
Min. Max.
— 80
— 90
-70 ns
Min. Max. Unit
— 70 mA
— 80
ISB1 TTL Standby Current VCC = Max.,
Com. — 10
(TTL Inputs)
VIN = VIH or VIL, CE1 ≥ VIH, Ind. — 15
or CE2 ≤ VIL, f = 0
— 10
— 15
— 10
— 15
— 10 mA
— 15
ISB2 CMOS Standby
VCC = Max.,
Com. — 500
Current (CMOS Inputs) CE1 ≤ VCC – 0.2V,
Ind. — 750
CE2 ≤ 0.2V, VIN > VCC – 0.2V,
or VIN ≤ 0.2V, f = 0
— 500
— 750
— 500
— 750
— 500 µA
— 750
Note:
1. At f = fMAX, address and data inputs are cycling at the maximum frequency, f = 0 means no input lines change.
4
Integrated Circuit Solution Inc.
ALSR009-0A 5/7/2002