IC62C1024L Datasheet, PDF (3/8 Pages) Integrated Circuit Solution Inc – 128K X 8 LOW POWER CMOS STATIC RAM

IC62C1024L
ABSOLUTE MAXIMUM RATINGS⁽¹⁾
Symbol
VTERM
TBIAS
TSTG
PT
IOUT
Parameter
Terminal Voltage with Respect to GND
Temperature Under Bias
Storage Temperature
Power Dissipation
DC Output Current (LOW)
Value
Unit
–0.5 to +7.0
V
–45 to +85
°C
–65 to +150
°C
1.5
W
20
mA
Notes:
1. Stress greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause
permanent damage to the device. This is a stress rating only and functional operation of the
device at these or any other conditions above those indicated in the operational sections of
this specification is not implied. Exposure to absolute maximum rating conditions for
extended periods may affect reliability.
CAPACITANCE^(1,2)
Symbol
CIN
COUT
Parameter
Input Capacitance
Output Capacitance
Conditions
VIN = 0V
VOUT = 0V
Max.
Unit
6
p.
8
p.
Notes:
1. Tested initially and after any design or process changes that may affect these parameters.
2. Test conditions: TA = 25°C, f = 1 MHz, Vcc = 5.0V.
DC ELECTRICAL CHARACTERISTICS (Over Operating Range)
Symbol Parameter
VOH
Output HIGH Voltage
VOL
Output LOW Voltage
VIH
Input HIGH Voltage
VIL
Input LOW Voltage
ILI
Input Leakage
ILO
Output Leakage
Test Conditions
VCC = Min., IOH = –1.0 mA
VCC = Min., IOL = 2.1 mA
GND ≤ VIN ≤ VCC
GND ≤ VOUT ≤ VCC
Notes:
1. VIL = –3.0V for pulse width less than 10 ns.
Com.
Ind.
Com.
Ind.
Min.
Max.
Unit
2.4
—
V
—
0.4
V
2.2 VCC + 0.5
V
–0.3
0.8
V
–2
2
µA
–10
10
–2
2
µA
–10
10
POWER SUPPLY CHARACTERISTICS⁽¹⁾ (Over Operating Range)
Symbol Parameter
Test Conditions
-35 ns
Min. Max.
-45 ns
Min. Max.
-55 ns
Min. Max.
-70 ns
Min. Max. Unit
ICC
Vcc Dynamic Operating VCC = Max., CE = VIL Com. — 100
— 90
— 80
— 70 mA
Supply Current
IOUT = 0 mA, f = fMAX
Ind. — 110
— 100
— 90
— 80
ISB TTL Standby Current VCC = Max.,
Com. — 10
(TTL Inputs)
VIN = VIH or VIL, CE1 ≥ VIH, Ind. — 15
or CE2 ≤ VIL, f = 0
— 10
— 15
— 10
— 15
— 10 mA
— 15
ISB
CMOS Standby
VCC = Max.,
Com. — 500
— 500
— 500
— 500 µA
Current (CMOS Inputs) CE1 ≤ VCC – 0.2V,
Ind. — 750
— 750
— 750
— 750
CE2 ≤ 0.2V, VIN > VCC – 0.2V,
or VIN ≤ 0.2V, f = 0
Note:
1. At f = fMAX, address and data inputs are cycling at the maximum frequency, f = 0 means no input lines change.
Integrated Circuit Solution Inc.
3
ALSR006-0A