IC62C1024L Datasheet, PDF (1/8 Pages) Integrated Circuit Solution Inc – 128K X 8 LOW POWER CMOS STATIC RAM

I_IC_C62₆C₂10_C24₁L _024L
128K x 8 LOW POWER CMOS STATIC RAM
.EATURES
• High-speed access time: 35, 45, 55, 70 ns
• Low active power: 450 mW (typical)
• Low standby power: 150 µW (typical) CMOS
standby
• Output Enable (OE) and two Chip Enable
(CE1 and CE2) inputs for ease in applications
• .ully static operation: no clock or refresh
required
• TTL compatible inputs and outputs
• Single 5V (±10%) power supply
DESCRIPTION
The 1+51 IC62C1024L is a low power,131,072-word by 8-bit
CMOS static RAM. It is fabricated using 1+51's high-
performance CMOS technology. This highly reliable process
coupled with innovative circuit design techniques, yields higher
performance and low power consumption devices.
When CE1 is HIGH or CE2 is LOW (deselected), the device
assumes a standby mode at which the power dissipation can
be reduced by using CMOS input levels.
Easy memory expansion is provided by using two Chip Enable
inputs, CE1 and CE2. The active LOW Write Enable (WE)
controls both writing and reading of the memory.
The IC62C1024L is available in 32-pin 600mil DIP, 450mil SOP
and 8*20mm TSOP-1 packages.
.UNCTIONAL BLOCK DIAGRAM
A0-A16
VCC
GND
I/O0-I/O7
DECODER
I/O
DATA
CIRCUIT
512 x 2048
MEMORY ARRAY
COLUMN I/O
CE1
CE2
CONTROL
OE
CIRCUIT
WE
ICSI reserves the right to make changes to its products at any time without notice in order to improve design and supply the best possible product. We assume no responsibility for any errors
which may appear in this publication. © Copyright 2000, Integrated Circuit Solution Inc.
Integrated Circuit Solution Inc.
1
ALSR006-0A