IC-LNG_14 Datasheet, PDF (8/30 Pages) IC-Haus GmbH – 16-BIT OPTO ENCODER

iC-LNG 16-BIT OPTO ENCODER ^preliminary
WITH SPI AND SERIAL / PARALLEL OUTPUTS
Rev B1, Page 8/30
ABSOLUTE MAXIMUM RATINGS
Maximum ratings do not constitute permissible operating conditions; functionality is not guaranteed.
Exceeding the maximum ratings can damage the device.
Item Symbol Parameter
No.
Conditions
G001 VDDA
Voltage at VDDA
G002 VDD
Voltage at VDD
G003 V(GND) Voltage at GND
G004 V()
Voltage at LED, PCOS, NCOS, PSIN,
NSIN, TPC, TNC, TPS, TNS
G005 V()
Voltage at INCA, INCB, INCZ, ERR,
CLK, DOUT, DIN, NSL, CS, MOSI,
MISO, SCK, PO6, PO5, POK, TPC,
TNC, TPS, TNS
G006 I(VDDA) Current in VDDA
G007 I(VDD) Current in VDD
G008 I(GND) Current in GND
G009 I(LED) Current in LED
G010 I()
Current in INCA, INCB, INCZ, ERR,
CLK, DOUT, DIN, NSL, CS, MOSI,
MISO, SCK, PO6, PO5, POK
G011 I()
Current in PCOS, NCOS, PSIN, NSIN,
TPC, TNC, TPS, TNS
G012 Vd()
ESD Susceptibility at all pins
HBM, 100 pF discharged through 1.5 kΩ
G013 Tj
Chip-Temperature
G014 Ts
Storage Temperature Range
see package specification
Min.
-0.3
-0.3
-0.3
-0.3
Unit
Max.
6
V
VDDA+0.3 V
0.3
V
VDDA+0.3 V
-0.3 VDD+0.3 V
-100
100
mA
-50
50
mA
-20
20
mA
-100
20
mA
-60
60
mA
-35
35
mA
2
kV
-40
125
°C
THERMAL DATA
Operating conditions: VDDA = 4 V to 5.5 V, VDD = 3 V to 5.5 V
Item Symbol Parameter
No.
Conditions
T01 Ta
Operating Ambient Temperature Range packages oBGA LNB2C, oQFN38-7x5
T02 Ts
T03 Tpk
Permissible Storage Temperature
Range
Soldering Peak Temperature
packages oBGA LNB2C, oQFN38-7x5
package oBGA LSH2C
Unit
Min. Typ. Max.
-40
110 °C
-40
110 °C
tpk < 20 s, convection reflow
tpk < 20 s, vapor phase soldering
245 °C
230 °C
T04 Tpk
Soldering Peak Temperature
TOL (time on label) 8 h;
Please refer to customer information file No. 7
for details.
package oQFN38-7x5
tpk < 20 s, convection reflow
tpk < 20 s, vapor phase soldering
245 °C
230 °C
MSL 5A (max. floor life 24 h at 30 °C and
60% RH);
Please refer to customer information file No. 7
for details.
All voltages are referenced to ground unless otherwise stated.
All currents flowing into the device pins are positive; all currents flowing out of the device pins are negative.