IC-MA_14 Datasheet, PDF (5/19 Pages) IC-Haus GmbH – 8-BIT ANGULAR HALL SENSOR / ENCODER

iC-MA
8-BIT ANGULAR HALL SENSOR / ENCODER
Rev C1, Page 5/19
ABSOLUTE MAXIMUM RATINGS
These ratings do not imply operating conditions; functional operation is not guaranteed. Beyond these ratings device damage may occur.
Item Symbol Parameter
No.
Conditions
Min.
Unit
Max.
G001 VDD
Supply Voltage
-0.3
6
V
G002 V()
Voltages at A, B, C, D, NEN, CFG1,
CFG2
V() < VDD + 0.3 V
-0.3
6
V
G003 Imx(VDD) Current at VDD
-30
30
mA
G004 Imx(GND) Current at GND
-30
30
mA
G005 Imx()
Current at A, B, C, D, NEN, CFG1,
CFG2
-10
10
mA
G006 Ilu()
Pulse Current (Latch-up Immunity) pulse width < 10 µs
-100
100
mA
G007 Vd()
ESD-Voltage at all pins
HBM 100 pF discharged over 1.5 kΩ
2
kV
G008 Ts
Storage Temperature
-40
150
°C
THERMAL DATA
Operating conditions: VDD = 5 V ±10 %
Item Symbol Parameter
No.
T01 Ta
Ambient Temperature
T02 Rthja
Thermal Resistance Chip/Ambient
Conditions
Unit
Min. Typ. Max.
-40
125 °C
DFN10 on multi-layer test board acc. JEDEC
standard
200 K/W
All voltages are referenced to ground unless otherwise stated.
All currents flowing into the device pins are positive; all currents flowing out of the device pins are negative.