IC-TW11 Datasheet, PDF (24/25 Pages) IC-Haus GmbH – 10-BIT ULTRA LOW POWER MAGNETIC ABSOLUTE ROTARY ENCODER

iC-TW11 10-BIT ULTRA LOW POWER^preliminary
MAGNETIC ABSOLUTE ROTARY ENCODER
DESIGN REVIEW: Function Notes
Rev B1, Page 24/25
iC-TW11 ...
No.
1
Function, Parameter/Code
Description and Application Hints
For any former chip release, please refer to datasheet release A1.
Table 24: Notes on chip functions regarding former iC-TW11 chip releases
iC-TW11 Z
No.
1
Function, Parameter/Code
Description and Application Hints
No further notes at time of printing.
Table 25: Notes on chip functions regarding iC-TW11 chip release Z
REVISION HISTORY
Rel. Rel. Date^† Chapter
A1 14-06-11
Modification
Initial release
Rel. Rel. Date^† Chapter
Modification
B1 2017-04-21 Various
Parameter name changed:
err → warn (conversion warning)
FEATURES
Features revised
BLOCK DIAGRAM
Block diagram updated
DESCRIPTION
Chapter revised
ELECTRICAL
CHARACTERISTICS
Item 003: condition
Item 006: max. value
OPERATING REQUIRE-
MENTS: SPI Interface
Item I007: new item
HALL SENSORS
Chapter added
REGISTER MAP
Tables 8 and 13 updated
USING INTERRUPTS
Table 23 updated
DESIGN REVIEW: Function Notes Chip release Z taken up
Page
all
Page
13ff
1
1
2
7
8
10
13, 15
20
24
iC-Haus expressly reserves the right to change its products and/or specifications. An Infoletter gives details as to any amendments and additions made to the
relevant current specifications on our internet website www.ichaus.com/infoletter and is automatically generated and shall be sent to registered users by email.
Copying – even as an excerpt – is only permitted with iC-Haus’ approval in writing and precise reference to source.
The data specified is intended solely for the purpose of product description and shall represent the usual quality of the product. In case the specifications contain
obvious mistakes e.g. in writing or calculation, iC-Haus reserves the right to correct the specification and no liability arises insofar that the specification was from
a third party view obviously not reliable. There shall be no claims based on defects as to quality in cases of insignificant deviations from the specifications or in
case of only minor impairment of usability.
No representations or warranties, either expressed or implied, of merchantability, fitness for a particular purpose or of any other nature are made hereunder
with respect to information/specification or the products to which information refers and no guarantee with respect to compliance to the intended use is given. In
particular, this also applies to the stated possible applications or areas of applications of the product.
iC-Haus products are not designed for and must not be used in connection with any applications where the failure of such products would reasonably be
expected to result in significant personal injury or death (Safety-Critical Applications) without iC-Haus’ specific written consent. Safety-Critical Applications
include, without limitation, life support devices and systems. iC-Haus products are not designed nor intended for use in military or aerospace applications or
environments or in automotive applications unless specifically designated for such use by iC-Haus.
iC-Haus conveys no patent, copyright, mask work right or other trade mark right to this product. iC-Haus assumes no liability for any patent and/or other trade
mark rights of a third party resulting from processing or handling of the product and/or any other use of the product.
Software and its documentation is provided by iC-Haus GmbH or contributors "AS IS" and is subject to the ZVEI General Conditions for the Supply of Products
and Services with iC-Haus amendments and the ZVEI Software clause with iC-Haus amendments (www.ichaus.com/EULA).
† _{Release Date format: YYYY-MM-DD}