HCPL-2200 Datasheet, PDF (8/11 Pages) Agilent(Hewlett-Packard) – Low Input Current Logic Gate Optocouplers

Switching Specifications (AC)
For 0°C ≤ T_A[1] ≤ 85°C, 4.5 V ≤ V_CC ≤ 20 V, 1.6 mA ≤ I_F(ON) ≤ 5 mA, 0.0 mA ≤ I_F(OFF) ≤ 0.1 mA.
All Typicals at T_A = 25°C, V_CC = 5 V, I_F(ON) = 3 mA unless otherwise specified.
Parameter
Sym. Min. Typ. Max. Units
Test Conditions
Fig. Note
Propagation Delay Time to
t_PHL
Logic Low Output Level
210
ns Without Peaking Capacitor 5, 6 4, 5
160 300
With Peaking Capacitor
Propagation Delay Time to
t_PLH
Logic High Output Level
170
ns Without Peaking Capacitor 5, 6 4, 5
115 300
With Peaking Capacitor
Output Enable Time to
t_PZH
25
ns
7, 9
Logic High
Output Enable Time to
t_PZL
28
ns
7, 8
Logic Low
Output Disable Time from
t_PHZ
105
ns
7, 9
Logic High
Output Disable Time from
t_PLZ
60
ns
7, 8
Logic Low
Output Rise Time (10-90%)
t_r
Output Fall Time (90-10%)
t_f
55
ns
15
ns
5, 10
5, 10
Parameter
Logic High
Common Mode
Transient
Immunity
Logic Low
Common Mode
Transient
Immunity
Sym.
|CM_H|
|CM_L|
Device
HCPL-2200
HCPL-2219
HCPL-2200
HCPL-2219
Min.
1,000
2,500
1,000
2,500
Units
V/µs
V/µs
V/µs
V/µs
Test Conditions
|V_CM| = 50 V
|V_CM| = 400 V
I_F = 1.6 mA
V_CC = 5 V
T_A = 25°C
|V_CM| = 50 V
|V_CM| = 400 V
V_F = 0 V
V_CC = 5 V
T_A = 25°C
Fig. Note
11 6
11 6
Package Characteristics
Parameter
Input-Output Momentary
Withstand Voltage*
Input-Output Resistance
Input-Output Capacitance
Sym.
V_ISO
R_I-O
C_I-O
Min. Typ. Max. Units
2500
V rms
10¹²
Ω
0.6
pF
Test Conditions
RH ≤ 50%, t = 1 min.,
T_A = 25°C
V_I-O = 500 VDC
f = 1 MHz, V_I-O = 0 VDC
Fig. Note
3, 8
3
3
*The Input-Output Momentary Withstand Voltage is a dielectric voltage rating that should not be interpreted as an input-output continuous
voltage rating. For the continuous voltage rating refer to the VDE 0884 Insulation Characteristics Table (if applicable), your equipment level
safety specification or HP Application Note 1074 entitled “Optocoupler Input-Output Endurance Voltage,” publication number 5963-2203E.
1-127