HCPL-2200 Datasheet, PDF (2/11 Pages) Agilent(Hewlett-Packard) – Low Input Current Logic Gate Optocouplers

The Electrical and Switching
Characteristics of the HCPL-
2200/2219 are guaranteed over
the temperature range of 0°C to
85°C and a V_CC range of 4.5 volts
to 20 volts. Low I_F and wide V_CC
range allow compatibility with
TTL, LSTTL, and CMOS logic and
result in lower power consump-
tion compared to other high
speed optocouplers. Logic signals
are transmitted with a typical
propagation delay of 160 nsec.
The HCPL-2200/2219 are useful
for isolating high speed logic
interfaces, buffering of input and
output lines, and implementing
isolated line receivers in high
noise environments.
Selection Guide
Minimum CMR
dV/dt V_CM
(V/µs) (V)
1,000 50
2,500 400
5,000^[2] 300^[2]
1,000 50
Input On-
Current
(mA)
1.6
1.8
1.6
1.6
1.8
2.0
Small-Outline Widebody
8-Pin DIP (300 Mil)
SO-8
(400 Mil)
Hermetic
Single
Channel
Package
Dual
Channel
Package
Single
Channel
Package
Single Single and Dual
Channel
Channel
Package
Packages
HCPL-2200^[1]
HCPL-2201
HCPL-2202
HCPL-0201 HCNW2201
HCPL-2231
HCPL-2219^[1]
HCPL-2211
HCPL-2212
HCPL-0211 HCNW2211
HCPL-2232
HCPL-52XX
HCPL-62XX
Notes:
1. HCPL-2200/2219 devices include output enable/disable functionality.
2. Minimum CMR of 10 kV/µs with V_CM = 1000 V can be achieved with input current, I_F, of 5 mA.
Ordering Information
Specify Part Number followed by Option Number (if desired).
Example:
HCPL-2219#XXX
060 = VDE 0884 V_IORM = 630 Vpeak Option*
300 = Gull Wing Surface Mount Option
500 = Tape and Reel Packaging Option
Option data sheets available. Contact your Hewlett-Packard sales representative or authorized distributor for
information.
*For HCPL-2219 only.
Schematic
I_F
+
2
V_F
–
3
SHIELD
I_CC
8 ^VCC
I_O
7 ^VO
I_E
6 ^VE
GND
5
1-121