E4887A Datasheet, PDF (8/20 Pages) Agilent(Hewlett-Packard) – Signal Generator Platform

Standard Compliant and Charac-
terization Tester E4887A-037 TMDS
Signal Generator up to 3.4 Gb/s
The E4887A-037 TMDS Signal Generator offers fastest compliance testing
based on CTS requirements including characterization capabilities up to
3.4 Gb/s.
Jitter Tolerance capabilities:
• Combined jitter tolerance compliance and characterization on all data
rates
• Separate jitter tolerance compliance start at 74 MHz pixel clock.
• Separate jitter tolerance characterization starting at 148 MHz pixel clock
Figure 4: Characterization Setup up to 3.4Gb/s
Instruments
1x E4887A-037
1x E4438C
1x 33220A
1x E3646A
HDMI TMDS Generator max. bit rate 3.4 Gb/s
ESG Vector Signal Generator with options see
page 18.
Arbitrary Waveform Generator up to 20 MHz
DC Power Supply, dual output, dual range
Software
1x E4887A-207
HDMI Frame Generator Software for E4887A
Accessories
1x E4887A-309
1x N1080A-H01
1x N1080A-H02
1x N1080A-H03
Accessory and cable kit for E4887A-037
Test point access adapter plug
Test point access adapter receptacle
2 units needed for cable test
Low frequency control board
BitifEye Digital Test Solutions (www.bitifeye.com), required:
1x BIT-HDMI-BTK-0037
Bias Tee kit for E4887A-037
1x BIT-HDMI-PPD-7373
Probe power distribution kit for DSO 8000
series
For additional accessories, see the E4887A ordering instructions on page 18.
For automated compliance sink and source testing
1x DSO80000
Real-time Oscilloscope
1x N5399A
HDMI software package for DSO80000
1x N5990A
Test Automation Platform with options -010,
-150 , -250, and -001 recommended
For more details on the cable emulators see page 16.
8