E4887A Datasheet, PDF (10/20 Pages) Agilent(Hewlett-Packard) – Signal Generator Platform

Economic High Speed Test up to
3.4 Gb/s E4887A-003 Signal
Generator
The economic E4887A-003 Signal Generator provides compliant HDMI sink
testing for HDMI devices from 740 Mbit up to 3.4 Gb/s and does fully follow the
test requirements of the HDMI CTS specification. Independent jitter injection
on TMDS clock and TMDS data is provided as well as jitter injection of clock
and data jitter components on the TMDS clock.
Jitter Tolerance capabilities are provided:
• Combined and separate Jitter tolerance compliance starting at 74 MHz
pixel clock
• Combined and separate Jitter tolerance characterization starting at
148 MHz pixel clock
Figure 5: Test Setup up to 3.4Gb/s
Instruments
1x E4887A-003
2x 33220A
1x E3646A
HDMI signal generator max. bit rate 3.4 Gb/s
Arbitrary Waveform Generator up to 20 MHZ
DC power supply, dual output, dual range
Software
1x E4887A-207
HDMI frame generator software for E4887A
Accessories
1x E4887A-303
1x N1080A-H01
1x N1080A-H02
1x N1080A-H03
Accessory and cable kit for E4887A-003
Test point access adapter plug
Test point access adapter receptacle 2 units
needed for cable test
Low frequency control board
BitifEye Digital Test Solutions (www.bitifeye.com), required:
1x BIT-HDMI-BTK-0003
Bias Tee kit for E4887A-003
1x BIT-HDMI-PPD-7373
Probe power distribution kit for DSO 8000
series
For additional accessories, see the E4887A ordering instructions on page 19.
Additional for compliance sink and source testing
1x DSO80000
Real-time Oscilloscope
1x N5399A
HDMI software package for DSO80000
1x N5990A
Test Automation Platform with options-010,
-150, -250, and -001 recommended
For more details on the cable emulators see page 16.
10