English
Language : 

HCPL-3150 Datasheet, PDF (6/15 Pages) Agilent(Hewlett-Packard) – 0.5 Amp Output Current IGBT Gate Drive Optocoupler
◁
Switching Specifications (AC)
Over recommended operating conditions (TA = -40 to 100°C, IF(ON) = 7 to 16 mA, VF(OFF) = -3.0 to 0.8 V,
VCC = 15 to 30 V, VEE = Ground) unless otherwise specified.
Parameter
Propagation Delay
Time to High
Output Level
Symbol
tPLH
Min.
0.10
Propagation Delay
tPHL
0.10
Time to Low
Output Level
Pulse Width
Distortion
PWD
Propagation Delay PDD -0.35
Difference Between (tPHL - tPLH)
Any Two Parts
Rise Time
Fall Time
UVLO Turn On
Delay
tr
tf
tUVLO ON
UVLO Turn Off
Delay
tUVLO OFF
Output High Level |CMH| 15
Common Mode
Transient
Immunity
Output Low Level
|CML|
15
Common Mode
Transient
Immunity
Typ.*
0.30
0.27
0.1
0.1
0.8
0.6
30
30
Max.
0.50
0.50
Units
µs
µs
Test Conditions
Rg = 47 Ω,
Cg = 3 nF,
f = 10 kHz,
Duty Cycle = 50%
0.3 µs
0.35 µs
µs
µs
µs
µs
kV/µs
kV/µs
VO > 5 V,
IF = 10 mA
VO < 5 V,
IF = 10 mA
TA = 25°C,
IF = 10 to 16 mA,
VCM = 1500 V,
VCC = 30 V
TA = 25°C,
VCM = 1500 V,
VF = 0 V,
VCC = 30 V
Fig.
10, 11,
12, 13
14, 23
Note
14
15
34,35 10
23
22
24 11, 12
11, 13
Package Characteristics
Parameter
Symbol Min. Typ.* Max. Units Test Conditions Fig. Note
Input-Output
VISO
2500
Vrms RH < 50%,
8, 9
Momentary
t = 1 min.,
Withstand Voltage**
TA = 25°C
Resistance
RI-O
1012
Ω VI-O = 500 VDC
9
(Input - Output)
Capacitance
CI-O
(Input - Output)
0.6
pF f = 1 MHz
LED-to-Case
θLC
Thermal Resistance
LED-to-Detector
θLD
Thermal Resistance
391
°C/W Thermocouple
28
located at center
439
°C/W underside of
package
Detector-to-Case
θDC
Thermal Resistance
119
°C/W
*All typical values at TA = 25°C and VCC - VEE = 30 V, unless otherwise noted.
**The Input-Output Momentary Withstand Voltage is a dielectric voltage rating that should not be interpreted as an input-output
continuous voltage rating. For the continuous voltage rating refer to your equipment level safety specification or HP Application Note
1074 entitled “Optocoupler Input-Output Endurance Voltage.”
1-202
 ▷