HDMP-0480 Datasheet, PDF (5/11 Pages) Agilent(Hewlett-Packard) – Octal Cell Port Bypass Circuit without Clock and Data Recovery

Table 1. Pin Definitions for HDMP-0480, continued
Pin Name Pin Pin Type Pin Description
GND
VCCHS[0,1]
VCCHS[2,3]
VCCHS[4]
VCCHS[5]
VCCHS[6,7]
VCC
2
S
3
4
6
7
9
10
11
12
18
39
52
61
21
S
33
45
48
58
5
S
8
17
27
64
Ground: Normally 0 volts. See Figure 7 for Recommended Power Supply Filtering.
High Speed Supply: Normally 3.3 volts. Used only for high-speed outputs (TO_NODE[n]).
See Figure 7 for Recommended Power Supply Filtering.
Logic Power Supply: Normally 3.3 volts. Used for internal logic.
See Figure 7 for Recommended Power Supply Filtering.
HDMP-0480 Absolute Maximum Ratings
T_a=25° C, except as specified. Operation in excess of any of these conditions may result in permanent
damage to this device. T_a refers to the ambient temperature for the board upon which the parametric
measurements were taken.
Symbol
Parameters
Units
Min.
Max.
V_CC
V_{IN, LVTTL}
V_{IN, HS_IN}
I_{O, LVTTL}
T_stg
T_j
Supply Voltage
LVTTL Input Voltage
HS_IN Input Voltage
LVTTL Output Voltage
Storage Temperature
Junction Temperature
V
-0.7
4.0
V
-0.7
4.0
V
1.3
V_CC
mA
±13
°C
-65
+150
°C
0
+125
HDMP-0480 Guaranteed Operating Rates, T_a = 0°C to +70°C, V_CC = 3.15V to 3.45V
Serial Clock Rate
FC (MBd)
Min. Max.
Serial Clock Rate
GE (MBd)
Min. Max.
1,040
1,080
1,240
1,260
5