HCPL-7510 Datasheet, PDF (5/16 Pages) Agilent(Hewlett-Packard) – Isolated Linear Sensing IC

Regulatory Information
The HCPL-7510 has been approved by the following organizations:
IEC/EN/DIN EN 60747-5-2
Approved under:
IEC 60747-5-2:1997 + A1:2002
EN 60747-5-2:2001 + A1:2002
DIN EN 60747-5-2 (VDE 0884 Teil 2):2003-01.
UL
Approved under UL 1577, component recognition
program up to V_ISO = 3750 V_RMS. File E55361.
CSA
Approved under CSA Component Acceptance
Notice #5, File CA 88324.
IEC/EN/DIN EN 60747-5-2 Insulation Characteristics^[1]
Description
Installation classification per DIN EN 0110-1/1997-04, Table 1
for rated mains voltage - 150 V_rms
for rated mains voltage - 300 V_rms
for rated mains voltage - 600 V_rms
Climatic Classification
Pollution Degree (DIN EN 0110-1/1997-04)
Maximum Working Insulation Voltage
Input to Output Test Voltage, Method b^[2]
V_IORM x 1.875 = V_PR, 100% production test with t_m = 1 sec, partial discharge <5 pC
Input to Output Test Voltage, Method a^[2]
V_IORM x 1.5 = V_PR, type and sample test, t_m = 60 sec, partial discharge <5 pC
Highest Allowable Overvoltage (transient overvoltage t_ini = 10 sec)
Safety-limiting values – maximum values allowed in the event of a failure.
Case Temperature
Input Current^[3]
Output Power^[3]
Insulation Resistance at T_S, V_IO = 500 V
Symbol Characteristic Unit
V_IORM
I – IV
I – III
I – II
55/100/21
2
891
V_peak
V_PR
1670
V_peak
V_PR
V_IOTM
1336
6000
V_peak
V_peak
T_S
175
°C
I_{S, INPUT} 400
mA
P_{S, OUTPUT} 600
mW
R_S
>10⁹
Ω
Notes:
1. Insulation characteristics are guaranteed only within the safety maximum ratings which must be
ensured by protective circuits within the application. Surface Mount Classifications is Class A in
accordance with CECC00802.
2. Refer to the optocoupler section of the Isolation and Control Components Designer’s Catalog,
under Product Safety Regulations section,
(IEC/EN/DIN EN 60747-5-2) for a detailed description of Method a and Method b partial
discharge test profiles.
3. Refer to the following figure for dependence of PS and IS on ambient temperature.
800
700
P_S (mW)
I_S (mA)
600
500
400
300
200
100
0
0 25 50 75 100 125 150 175 200
T_S – CASE TEMPERATURE – C
5