HDSP-253 Datasheet, PDF (4/16 Pages) Agilent(Hewlett-Packard) – Eight Character 5 mm Smart Alphanumeric Display

4
Recommended Operating Conditions
Parameter
Symbol
Minimum
Supply Voltage
V_DD
4.5
Nominal
5.0
Maximum
5.5
Units
V
Electrical Characteristics over Operating Temperature Range
4.5 < V_DD < 5.5 unless otherwise specified
Parameter
Symbol Min.
25°C 25°C
Typ.^[1] Max.^[1]
Max. Units
Test Conditions
Input Leakage
(Input without pull-up)
Input Current
(Input with pull-up)
I_I
-1.0
I_IP
-30 -11
-18
1.0
µA V_IN = 0 to V_DD, pins CLK,
D₀-D₇, A₀-A₄
0
µA V_IN = 0 to V_DD, pins CLS,
RST, WR, RD, CE, FL
I_DD Blank
I_DD 8 digits 12 dots/char^[2,3,4]
(AlGaAs)
I_DD(BL)
I_DD(V)
0.5
3.0
230 295
4.0
mA V_IN = V_DD
390 mA "V" on in all 8 locations
I_DD 8 digits 20 dots/char^[2,3,4] I_DD(#)
(AlGaAs)
330 410
480 mA "#" on in all 8 locations
I_DD 8 digits 12 dots/char^[2,3,4] I_DD(V)
(all colors except AlGaAs)
200 255
330 mA "V" on in all 8 locations
I_DD 8 digits 20 dots/char^[2,3,4] I_DD(#)
(all colors except AlGaAs)
300 370
430 mA "#" on in all 8 locations
Input Voltage High
V_IH
2.0
V_DD
V
+0.3 V
Input Voltage Low
V_IL
GND
-0.3 V
0.8
V
Output Voltage High
Output Voltage Low
D₀-D₇
Output Voltage Low
CLK
V_OH
2.4
V_OL
V_OL
V V_DD = 4.5 V, I_OH = -40 µA
0.4
V V_DD = 4.5 V, I_OL = 1.6 mA
0.4
V V_DD = 4.5 V, I_OL = 40 µA
Thermal Resistance IC
Rθ_J-PIN
16
Junction-to-PIN
°C/W Measured at pin 17
Notes:
1. V_DD = 5.0 V.
2. See Thermal Considerations Section for information about operation in high temperature ambients.
3. Average I_DD measured at full brightness. See Table 2 in Control Word Section for I_DD at lower brightness levels.
Peak I_DD = 28/15 x I_DD(#).
4. Maximum I_DD occurs at -55°C.