HDSP-253 Datasheet, PDF (2/16 Pages) Agilent(Hewlett-Packard) – Eight Character 5 mm Smart Alphanumeric Display

2
Package Dimensions
PIN FUNCTION ASSIGNMENT TABLE
4.57 _TYP.
(0.180)
0
PIN # 1 IDENTIFIER
42.93 (1.690) MAX.
2.68 (0.105) SYM.
5.36 (0.211) TYP.
1
2
3
4
5
6
7
11.43 (0.450) MAX.
2.29
0.090 ^SYM.
2.54 (0.100) TYP.
PART NUMBER
DATE CODE (YEAR, WEEK)
LUMINOUS INTENSITY CATEGORY
COLOR BIN (3)
PIN # FUNCTION
1 RST
2^{PIN F}F^UL^N
3_{PIN #}A0_FU
4 A1
5
1
2
A2^RF
6 3 A3A
7 ⁴ NO^APIN
5A
8 ₆ NO_APIN
9 7 NONPIN
10
8
9
A4^NN
1110 CLAS
12¹¹ CL^CK
12 C
13₁₃ WR_W
14¹⁴ CE^C
15 V
15 V_DD
[4]
HP
HDSP-253X _{X Z}
YYWW
5.31
(0.209)
______
4.01 _TYP
(0.158)
PIN #
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
FUNCTION
GND (SUPPLY)
THERMAL TEST
GND (LOGIC)
RD
D0
D1
NO PIN
NO PIN
NO PIN
D2
D3
D4
D5
D6
D7
0.25
(0.010)
(01..05620)REF.
PIN # 1
2.54 ± 0.13 _TYP.
(0.100 ± 0.005)
(TOL. NON ACCUM.)
10.16
(0.400)
5.08 _SYM
(0.200)
PIN #15
PIN # 15 _{PIN # 15}
(03.1.8510)SYM^{(03..18510)SYM.}
0.46
(0.018
±
±
0.13
0.005)
TYP.
7.62
7.62
(0.300) (0.300)
PIN # 16
NOTES:
1. DIMENSIONS ARE IN MM (INCHES).
2. UNLESS OTHERWISE SPECIFIED, TOLERANCE ON DIMENSIONS IS ± 0.25 MM (0.010 IN.).
3. FOR YELLOW AND GREEN DISPLAYS ONLY.
4. MARKING IS ON SIDE OPPOSITE PIN 1.
Absolute Maximum Ratings
Supply Voltage, V_DD to Ground^[1] .................................... -0.3 V to 7.0 V
Operating Voltage, V_DD to Ground^[2] .............................................. 5.5 V
Input Voltage, Any Pin to Ground ........................... -0.3 V to V_DD +0.3 V
Free Air Operating Temperature Range, T_A[3 ^] .............. -40°C to + 85°C
Relative Humidity (Non-Condensing) .............................................. 85%
Storage Temperature Range, T_S ...................................... -55°C to 100°C
Wave Solder Temperature
1.59 mm (0.063 in.) below Body .............................. 250°C for 3 secs
ESD Protection @ 1.5 kΩ, 100 pF ................................. 4 kV (each pin)
Notes:
1. Maximum Voltage is with no LEDs illuminated.
2. 20 dots ON in all locations at full brightness.
3. See Thermal Considerations section for information about operation in high
temperature ambients.
ESD WARNING: NORMAL CMOS HANDLING PRECAUTIONS SHOULD BE OBSERVED TO
AVOID STATIC DISCHARGE.