English
Language : 

HMMC-3108 Datasheet, PDF (3/8 Pages) Agilent(Hewlett-Packard) – DC-16 GHz Packaged Divide-by-8
RF Specifications
(TA= +25 °C, Z0 = 50 W, VCC - VEE = 5.0 volts)
Symbol Parameters/Conditions
Min
Typ
Max
Units
ƒin(max)
ƒin(min)
ƒSel-Osc.
Pin
RL
S12
jN
Maximum input frequency of operation
16
Minimum input frequency of operation1 (Pin = -10 dBm)
Output Self-Oscillation Frequency2
@ dc, (Square-wave input)
-15
@ ƒin = 500 MHz, (Sine-wave input)
-15
ƒin = 1 to 8 GHz
-15
ƒin = 8 to 10 GHz
-10
ƒin = 10 to 12 GHz
-4
Small-Signal Input/Output Return Loss (@ ƒin <10 GHz)
Small-Signal Reverse Isolation (@ ƒin <10 GHz)
SSB Phase noise (@ Pin = 0 dBm, 100 KHz offset from a ƒout =
1.2 GHz Carrier)
18
0.2
0.5
3.4
>-25
+10
>-20
+10
>-25
+10
>-15
+10
>-10
+4
15
30
-153
GHz
GHz
GHz
dBm
dBm
dBm
dBm
dBm
dB
dB
dBc/Hz
Jitter
Input signal time variation @ zero-crossing (ƒin = 10 GHz, Pin =
1
ps
-10 dBm)
Tr or Tf
Output transition time (10% to 90% rise/fall time)
70
P3
out
@ ƒout < 1 GHz
4
6
@ ƒout = 2.5 GHz
3.5
5.5
@ ƒout = 3.0 GHz
0
2.0
|Vout(p-p)|4
@ ƒout < 1 GHz
0.99
@ ƒout = 2.5 GHz
0.94
@ ƒout = 3.0 GHz
0.63
PSpitback
ƒout power level appearing at RFin or RFout (@ ƒin 10 GHz,
-40
Unused RFout or RFout unterminated)
ƒout power level appearing at RFin or RFout (@ ƒin 10 GHz, Both
-47
RFout or RFout unterminated)
Pfeedthru
Power level of ƒin appearing at RFout or RFout (@ ƒin = 12 GHz,
-23
Pin = 0 dBm, Referred to Pin (ƒin))
H2
Second harmonic distortion output level (@ ƒout = 3.0 GHz,
-25
Referred to Pout (ƒout))
ps
dBm
dBm
dBm
volts
volts
volts
dBm
dBm
dBc
dBc
Notes:
1. For sine–wave input signal. Prescaler will operate down to dc for square–wave input signal. Min. divide frequency limited by input slew rate.
2. Prescaler can exhibit this output signal under bias in the absence of an RF input signal. This condition can be eliminated by use of the Input dc offset
technique described on page 4.
3. Fundamental of output square wave’s Fourier Series.
4. Square wave amplitude calculated from Pout.
3